Lincoln Navigator 2016 Owner's Manual
![Lincoln Navigator 2016 SUV manual cover](/images/mkjjkIRvpbsoFCiHGWqQVBax/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "on" position without starting the engine. Press the "Settings" button on the steering wheel until you see "Vehicle Settings" on the display. Scroll to "Oil Life Reset" and press "OK." Hold "OK" until the oil life resets to 100%.
The 2016 Lincoln Navigator typically requires SAE 5W-30 full synthetic motor oil. Always check your owner's manual for specific recommendations.
To connect your phone via Bluetooth, turn on your phone's Bluetooth and make it discoverable. On the Navigator's SYNC system, press "Phone" and then "Add Device." Select your phone from the list and confirm the pairing code matches.
If the key fob battery is dead, use the backup key inside the fob to unlock the door. To start the vehicle, place the key fob in the backup slot usually located in the center console or beneath the cup holder, and then press the start button with the brake pedal depressed.
To replace the air filter, open the hood and locate the air filter housing. Unclip the cover and remove the old filter. Insert the new filter and ensure it is seated properly. Reattach the cover and secure the clips.
Common causes of a check engine light include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or spark plug and ignition coil problems. It's recommended to use an OBD-II scanner to diagnose the specific issue.
To improve fuel efficiency, ensure regular maintenance including timely oil changes and air filter replacements. Maintain proper tire pressure, reduce excessive idling, and avoid rapid acceleration and heavy loads.
The 2016 Lincoln Navigator has a towing capacity of up to 9,000 pounds when properly equipped, including the Heavy-Duty Trailer Tow Package. Always consult your owner's manual for specific towing requirements and limitations.
Locate the fuse box, which can be found under the dashboard or in the engine compartment. Refer to the fuse box cover for the fuse diagram. Use a fuse puller to remove the blown fuse and replace it with one of the same amperage.
To update the SYNC system, download the latest update from the Lincoln website onto a USB drive. Insert the USB drive into the vehicle's USB port and follow the on-screen instructions to complete the update. Ensure the vehicle is parked and the engine is running during the update process.