Lincoln Navigator 2015 Owner's Manual
![Lincoln Navigator 2015 SUV manual cover](/images/BlRZnYLKsFOSmTqNdzmajKIt/thumbs/thumb175x175.webp)
The recommended maintenance schedule for the 2015 Lincoln Navigator includes an oil change every 7,500 miles, tire rotation every 7,500 miles, and a brake inspection every 15,000 miles. Additionally, replace the cabin air filter every 15,000 miles and check the battery every 20,000 miles.
To reset the oil change light on a 2015 Lincoln Navigator, turn the ignition to the "on" position without starting the engine. Use the information display control on the steering wheel to navigate to "Settings," then "Vehicle," and select "Oil Life Reset." Hold the "OK" button until the display shows 100% reset.
The 2015 Lincoln Navigator requires SAE 5W-20 synthetic blend motor oil. It is important to use the recommended oil type to ensure optimal engine performance and longevity.
To pair your phone with the SYNC system, turn on your vehicle and enable Bluetooth on your phone. Press the "Phone" button on the SYNC system, and then select "Add a Device." Follow the prompts to select your phone from the list and enter the PIN displayed on the screen to complete pairing.
The 2015 Lincoln Navigator has a maximum towing capacity of 9,000 pounds when properly equipped with the available Heavy-Duty Trailer Tow Package. Always refer to the owner's manual for specific towing guidelines.
If the navigation system stops working, first try resetting it by turning off the vehicle for a few minutes, then restarting. Ensure that the navigation SD card is properly inserted. If the issue persists, check for software updates or consult with a Lincoln dealership for assistance.
Common causes for the "Check Engine" light in a 2015 Lincoln Navigator include a loose gas cap, faulty oxygen sensor, failing catalytic converter, or issues with the spark plugs or ignition coils. A diagnostic scan tool can help pinpoint the exact cause.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the dust cover and disconnect the electrical connector. Turn the bulb counter-clockwise to remove it. Insert the new bulb, turn it clockwise to secure, reconnect the electrical connector, and replace the dust cover.
If your Navigator won't start, check the battery for charge and corrosion on the terminals. Ensure the vehicle is in park or neutral and the brake pedal is fully depressed. If these are fine, check the starter and ignition system. If the issue persists, seek professional assistance.
To change the cabin air filter, open the glove box and detach the dampener arm. Press in on the sides of the glove box to release it. Locate the cabin air filter cover, unclip it, and remove the old filter. Insert the new filter with the airflow direction arrow pointing down and reassemble the glove box.