Lincoln MKZ 2019 Owner's Manual
![Lincoln MKZ 2019 Sedan manual cover](/images/RCGVEHwUKLAQqRPuylvfoMHz/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "on" position without starting the engine. Press the brake and gas pedals simultaneously and hold them down until a message appears on the dashboard indicating that the oil life has been reset.
The 2019 Lincoln MKZ typically requires SAE 5W-30 full synthetic oil. Always refer to the owner's manual for the most accurate information for your specific vehicle.
To connect your smartphone, enable Bluetooth on your device, then on the SYNC 3 screen, go to 'Settings' > 'Bluetooth' > 'Add a Device'. Follow the on-screen instructions to pair your smartphone.
If the key fob battery is dead, use the mechanical key inside the fob to unlock the driver’s door. Then, replace the battery by opening the fob and inserting a new CR2032 battery.
To enable adaptive cruise control, press the 'ON' button on the steering wheel, then accelerate to your desired speed and press the 'SET' button. Adjust the following distance using the distance setting controls.
The recommended tire pressure for the 2019 Lincoln MKZ is typically 33 PSI for both front and rear tires. Check the sticker on the driver’s side door jamb for specific recommendations.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the electrical connector, and take out the old bulb. Insert the new bulb, reconnect the connector, and replace the cover.
If the engine overheats, safely pull over and turn off the vehicle. Allow the engine to cool before checking the coolant level. Refill if necessary and inspect for leaks. If the problem persists, contact a professional mechanic.
To use parking assist, press the parking assist button on the center console. Follow the on-screen instructions and use the directional controls to help the system guide your vehicle into a parking space.
To update the navigation system, visit the Lincoln website to download the latest map updates onto a USB drive. Insert the USB drive into the vehicle's USB port and follow the on-screen instructions to install the update.