Lincoln MKZ 2012 Owner's Manual

To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the "Setup" button until "Oil Life" is displayed, then press "Reset" until "100%" is shown.
The recommended engine oil for a 2012 Lincoln MKZ is SAE 5W-20. It's important to use high-quality engine oil that meets Ford specification WSS-M2C945-A.
First, check the battery terminals for corrosion and ensure the battery is charged. If the battery is fine, inspect the starter and ignition system or consult a professional mechanic.
The recommended tire pressure for the 2012 Lincoln MKZ is usually 32 psi for both front and rear tires. However, always check the sticker on the driver’s side door jamb for specific details.
To replace the key fob battery, gently pry open the key fob case using a small flathead screwdriver. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up.
If the check engine light is on, first ensure your gas cap is tightened properly. If the light remains, have the vehicle diagnosed with an OBD-II scanner to identify any error codes.
To pair your phone, turn on Bluetooth on your device. On the car's SYNC system, press "Phone" > "Settings" > "Add Device" and follow the prompts on both your phone and the vehicle’s display.
It's recommended to replace the air filter every 15,000 to 30,000 miles, or as needed based on driving conditions. Check it regularly for dirt and debris.
The 2012 Lincoln MKZ is not typically recommended for towing as it lacks a factory tow package and is not designed for heavy towing duties. Consult your owner’s manual for more details.
To perform a factory reset on the SYNC system, navigate to "Settings" > "System Settings" > "Master Reset" and confirm your selection. Be aware that this will erase all stored data.