Lincoln MKS 2015 Owner's Manual
![Lincoln MKS 2015 Sedan manual cover](/images/vHUVZeTaXzfdgCZEeInuNOWy/thumbs/thumb175x175.webp)
The recommended engine oil for the 2015 Lincoln MKS Sedan is SAE 5W-20. It is important to use oil that meets the Ford specification WSS-M2C945-A.
The air filter should be checked every 15,000 miles and replaced every 30,000 miles or as needed, depending on driving conditions.
To reset the TPMS, turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the vehicle and let it run for 20 minutes to complete the reset process.
To pair your smartphone, turn on Bluetooth on your phone and make it discoverable. On the SYNC system, press the "Phone" button, then select "Add a Device." Follow the prompts on both the SYNC screen and your phone to complete the pairing process.
If the engine overheats, pull over safely and turn off the vehicle. Wait for the engine to cool before checking the coolant level. If low, add coolant to the reservoir, but only after the engine has cooled. If the problem persists, seek professional assistance.
To change a flat tire, park on a level surface and turn on your hazard lights. Loosen the lug nuts slightly, then use the jack to lift the vehicle. Remove the lug nuts and the flat tire. Place the spare tire on the hub, tighten the lug nuts by hand, lower the car, and fully tighten the lug nuts in a star pattern.
The recommended tire pressure for the 2015 Lincoln MKS is typically 32 psi for both front and rear tires. However, always refer to the placard located on the driver's side door jamb for the most accurate information.
To update the navigation system, you can purchase the latest map update from the Lincoln website or a dealership. Follow the instructions provided with the update, which typically involves using a USB drive to transfer the new maps to your vehicle's system.
Signs that your battery may need replacement include difficulty starting the engine, dim lights, a battery warning light on the dashboard, and corrosion around the battery terminals.
To perform a factory reset on the SYNC system, go to the "Settings" menu, select "System," then choose "Master Reset." Confirm your selection and wait for the process to complete, which will restore the system to its original factory settings.