Lincoln MKC 2015 Owner's Manual
![Lincoln MKC 2015 Crossover manual cover](/images/hgKcmXhaXXhogKwVYFMwXZWk/thumbs/thumb175x175.webp)
To connect your smartphone to the SYNC system, ensure Bluetooth is enabled on your phone. On the SYNC screen, go to 'Phone', then 'Add a Device'. Follow the prompts on your phone to complete the pairing process.
The recommended tire pressure for the Lincoln MKC 2015 is 35 PSI for both front and rear tires. Check the tire information placard on the driver’s side door jamb for confirmation.
It is recommended to change the oil every 7,500 miles or every 12 months, whichever comes first, when using synthetic oil. Always refer to your owner's manual for specific recommendations.
The Lincoln MKC 2015 is designed to run on regular unleaded gasoline with an octane rating of 87. However, using premium fuel may offer a slight improvement in performance.
To reset the oil change reminder, turn the ignition to the 'on' position without starting the engine. Use the controls on the steering wheel to navigate to 'Settings', then 'Vehicle', and select 'Oil Life Reset'. Follow the prompts to reset.
The check engine light can be triggered by various issues such as a loose gas cap, faulty oxygen sensor, or engine misfire. It's best to use an OBD-II scanner to diagnose the specific error code or take the vehicle to a qualified mechanic.
To change the cabin air filter, locate the filter behind the glove compartment. Open the glove box, remove the limiting stop arm, and lower the glove box. Remove the filter cover and replace the old filter with a new one. Reassemble in reverse order.
If the battery dies, you can jump-start the vehicle using jumper cables and another vehicle with a charged battery. Connect the positive and negative cables to the respective terminals on both batteries, then start the assisting vehicle first, followed by the MKC.
To update the navigation system, visit the official Lincoln website to purchase the latest map update. Follow the instructions provided with the update package to install it onto the vehicle's system via USB.
If the air conditioning isn't blowing cold air, check if the refrigerant levels are low, the AC compressor is functioning, and the cabin air filter is not clogged. If the problem persists, consult with a professional technician for further diagnosis.