Lincoln Mark LT 2008 Owner's Manual

The recommended oil type for the 2008 Lincoln Mark LT is 5W-20 synthetic blend oil.
To reset the TPMS, turn the ignition to the ON position without starting the engine. Press and hold the TPMS reset button until the TPMS light blinks several times, then release the button. Drive the vehicle for a few minutes to complete the reset process.
The 2008 Lincoln Mark LT has a towing capacity of up to 8,900 pounds when properly equipped.
To replace the cabin air filter, locate the filter housing under the dashboard on the passenger side. Remove the cover and slide out the old filter. Insert the new filter and replace the cover securely.
The recommended tire pressure for the 2008 Lincoln Mark LT is typically 35 PSI for both front and rear tires, but always check the placard located on the driver's side door jamb for specific recommendations.
To program a new key fob, insert the existing working key into the ignition and turn it to the ON position. Insert the new key within 10 seconds and turn it to the ON position. If successful, the new key fob will be programmed.
Signs of a failing alternator include dimming headlights, battery warning light on the dashboard, strange noises from the engine bay, and electrical issues such as power windows not functioning properly.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles, but refer to the owner's manual for specific maintenance intervals.
The 2008 Lincoln Mark LT typically requires a Group 65 battery with appropriate cold cranking amps (CCA) for optimal performance.
First, check the window fuse and replace it if necessary. If the fuse is intact, test the window switch and motor for functionality. Wiring issues can also cause problems, so inspect the wiring harness for any signs of damage.