Lincoln Continental 2017 Owner's Manual
![Lincoln Continental 2017 Sedan manual cover](/images/RHNNaCEEOvpWczUMWjdkVkvS/thumbs/thumb175x175.webp)
To reset the oil change reminder, turn on the ignition without starting the engine. Use the controls on the steering wheel to access the settings menu, find 'Oil Life Reset', and hold the OK button until it resets to 100%.
The 2017 Lincoln Continental typically requires SAE 5W-30 full synthetic oil, but it's always best to refer to the owner's manual for the exact specifications.
To pair your phone, ensure Bluetooth is enabled on your device. On the SYNC 3 screen, go to 'Settings', then 'Bluetooth', and select 'Add a Device'. Follow the on-screen instructions to complete the pairing process.
If the keyless entry system is not working, check the battery in your key fob. If the battery is fine, try reprogramming the key fob or consult a dealer for further assistance.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, keep tires inflated to the recommended pressure, and drive at steady speeds without rapid acceleration.
If the air conditioning is not blowing cold air, check the refrigerant level; it may need a recharge. Also, inspect the cabin air filter and AC compressor for any issues.
Common causes for the check engine light include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or problems with the spark plugs or ignition coils.
To update the navigation system, visit the Lincoln website to check for available updates. You can usually download the update onto a USB drive and follow the instructions provided to install it in your vehicle.
The recommended tire pressure for the 2017 Lincoln Continental is typically found on a sticker inside the driver's door. It usually suggests 34 PSI for both front and rear tires, but always confirm with the manual.
To replace a headlight bulb, open the hood and locate the headlight assembly. Remove the cover, disconnect the wiring harness, and replace the old bulb with a new one. Ensure the new bulb is securely in place before reconnecting the harness and closing the cover.