Lawn-Boy 81140-3900001 Set-up Instructions
![Lawn-Boy 81140-3900001 Tractor manual cover](/images/LxwfeVhZZsotIXMpFNMiBGja/thumbs/thumb175x175.webp)
To start the Lawn-Boy 81140-3900001 Tractor, ensure the parking brake is engaged, the PTO switch is off, and the throttle is set to choke. Turn the ignition key to the start position until the engine fires, then release the key.
If the engine doesn't start, check the fuel level, ensure the spark plug is connected, and confirm the battery is charged. Also, verify that the safety switches are functioning properly.
Regularly inspect the cutting blades for wear and damage. Sharpen them as needed and replace any that are bent or cracked to ensure efficient performance.
Use SAE 30 oil for temperatures above 32°F and SAE 5W-30 for colder temperatures. Always refer to the owner's manual for the most accurate oil specifications.
Change the oil after the first 5 hours of use and then every 50 hours of operation or once a season, whichever comes first, to maintain optimal engine health.
To adjust the mower deck height, locate the height adjustment lever on the tractor and move it to the desired position. Ensure the deck is level for an even cut.
Clean the tractor thoroughly, change the oil, stabilize the fuel, and store it in a dry, covered area. Disconnect the battery to prevent drainage.
Check if the blades are dull or damaged and ensure they are properly installed. Verify that the deck is level and inspect the tire pressure for consistency.
Maintain the front tires at 14 psi and the rear tires at 10 psi. Proper tire pressure ensures optimal traction and cutting performance.
To replace the spark plug, disconnect the spark plug wire, use a spark plug wrench to remove the old plug, and install a new one with the correct gap. Reattach the spark plug wire securely.