Korona 73550 Instructions for Use
![Korona 73550 Scale manual cover](/images/ajsVYJghnnIyKaocdEVfYLbH/thumbs/thumb175x175.webp)
To calibrate your Korona 73550 Scale, place it on a flat, stable surface. Turn it on and wait for it to display zero. Press the calibration button until the display shows the calibration weight value. Place the corresponding weight on the scale and wait for the scale to confirm calibration.
If your Korona 73550 Scale is not turning on, check the batteries to ensure they are properly installed and have sufficient charge. Replace the batteries if necessary. If the problem persists, inspect the battery compartment for corrosion and clean it if needed.
To reset the Korona 73550 Scale, remove the batteries and wait for at least 10 seconds before reinserting them. This action should reset the scale and clear any temporary errors.
The Korona 73550 Scale has a maximum weight capacity of 180 kilograms (approximately 396 pounds). Ensure not to exceed this limit to maintain accuracy and prevent damage.
An error message on the Korona 73550 Scale could indicate an overload or an unstable surface. Remove any excess weight and ensure the scale is placed on a flat, stable surface. Reset the scale if the error persists.
To switch between metric and imperial units, locate the unit switch button on the underside or side of the scale. Press the button to toggle between kilograms and pounds. The display will update to reflect the selected unit.
Regular maintenance for the Korona 73550 Scale includes keeping it clean and dry. Wipe the surface with a soft, damp cloth and avoid using harsh chemicals. Store the scale in a dry environment to prevent damage.
To change the batteries in your Korona 73550 Scale, turn the scale over and locate the battery compartment. Open the compartment cover, remove the old batteries, and insert new ones, ensuring correct polarity. Close the compartment securely.
It is not recommended to use the Korona 73550 Scale on carpet as it can affect the accuracy of the measurements. Always place the scale on a hard, flat surface for best results.
If your scale is giving inconsistent readings, ensure it is on a stable, level surface. Re-calibrate the scale and check the batteries for sufficient charge. Avoid moving the scale between measurements to maintain consistency.