KitchenAid KBSD702MPS Quick Start Guide
![KitchenAid KBSD702MPS Refrigerator manual cover](/images/RNGZuGKkcAyGMPUIHAiCwIiQ/thumbs/thumb175x175.webp)
To change the water filter, locate the filter in the upper right-hand corner of the refrigerator. Turn the filter counterclockwise to remove it, then insert the new filter and turn it clockwise until it is secure.
Ensure that the refrigerator is plugged in and the power is on. Check if the vents are blocked by food items. Also, verify that the temperature settings are at the recommended level.
Check if the ice maker is turned on and if the water supply line is connected and turned on. Also, inspect for any ice jams or blockages in the ice maker.
Unplug the refrigerator and locate the condenser coils either behind or beneath the unit. Use a vacuum cleaner or a brush to remove dust and debris from the coils.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C) and for the freezer compartment, it is 0°F (-18°C).
To reset the control panel, unplug the refrigerator for 5 minutes and then plug it back in. This should reset the control system.
Check if the defrost drain is clogged and clean it if necessary. Also, inspect the water filter and connections for any leaks.
It is recommended to replace the air filter every 6 months to ensure optimal performance and freshness.
Ensure that the refrigerator is level and not touching any walls or cabinets. Check for items inside that may be vibrating and causing noise.
To activate Sabbath Mode, press and hold the 'Sabbath Mode' button on the control panel for 3 seconds until the indicator light turns on.