Kia Sorento 2022 Features and Functions Guide
![Kia Sorento 2022 SUV manual cover](/images/SqXJbTghFMxVacpVPzdDNqXx/thumbs/thumb175x175.webp)
To pair your smartphone with the Kia Sorento 2022, ensure Bluetooth is enabled on your phone. On the vehicle's infotainment screen, navigate to 'Setup' > 'Bluetooth' > 'Add New'. Select your vehicle from the list of available devices on your phone and confirm the pairing code.
The recommended tire pressure for the Kia Sorento 2022 is typically 35 PSI for both front and rear tires. However, always refer to the sticker on the driver's side door jamb for the most accurate information.
To reset the oil change reminder, turn the ignition to ON (don't start the engine). Navigate to the 'Settings' menu on the display, select 'Vehicle', then 'Service Interval'. From there, choose 'Reset'.
If the engine fails to start, first check the battery connections and ensure they are clean and tight. Verify that the fuel level is adequate. If these are not the issue, it might be a problem with the starter or ignition system, and you should contact a professional mechanic.
To use Smart Cruise Control, press the 'CRUISE' button on the steering wheel. Accelerate to your desired speed and press the 'SET' button. Adjust the following distance using the distance buttons. The system will automatically adjust your speed to maintain the set distance from the vehicle ahead.
It is recommended to inspect the air filter every 15,000 miles and replace it every 30,000 miles or as needed, depending on driving conditions. Refer to the owner's manual for specific guidance.
The Kia Sorento 2022 typically requires 5W-30 synthetic oil for optimal performance. Always consult your owner's manual for the manufacturer's recommendations.
The Kia Sorento 2022 is designed to run on regular unleaded gasoline with an octane rating of 87. Using premium gasoline is not necessary unless specified for certain engine options.
To update the navigation system, download the latest maps from the official Kia website onto a USB drive. Insert the USB into the vehicle's USB port and follow the on-screen instructions. Ensure the vehicle is stationary during the update.
To change a flat tire, first ensure the vehicle is on a stable surface and turn on the hazard lights. Use the lug wrench to loosen the lug nuts slightly. Place the jack under the vehicle's jacking point and raise the car until the tire is off the ground. Remove the lug nuts and the flat tire, then mount the spare tire. Tighten the lug nuts in a crisscross pattern and lower the vehicle.