Kia Sorento 2020 Features and Functions Guide
![Kia Sorento 2020 SUV manual cover](/images/wSNIAESmNDdMOKAyUeamsfMz/thumbs/thumb175x175.webp)
To reset the TPMS, ensure all tires are properly inflated. Turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button until the tire pressure warning light blinks three times, then release it. Start the engine and let it run for about 20 minutes to complete the reset process.
The 2020 Kia Sorento typically requires SAE 5W-30 or 5W-20 engine oil. Always refer to the owner's manual for the specific oil grade recommended for your engine variant.
Activate Bluetooth on your smartphone. On the Sorento's infotainment system, go to "Setup," then "Bluetooth," and select "Pair New Device." Follow the prompts on the screen and your phone to complete the pairing process.
Open the hood and locate the back of the headlight assembly. Remove the dust cover, disconnect the power connector, and release the bulb by unclipping it. Replace it with a new bulb, ensuring not to touch the glass with bare hands. Reconnect the power and dust cover.
The towing capacity of the 2020 Kia Sorento varies by engine type. The 2.4L 4-cylinder engine can tow up to 2,000 pounds, while the 3.3L V6 engine can tow up to 5,000 pounds when properly equipped.
Press the "Setup" button on the infotainment system. Navigate to "System Info" and select "Factory Reset." Confirm your choice when prompted to reset the system to its original settings.
The recommended tire pressure for the 2020 Kia Sorento is typically 34 psi for both front and rear tires. Always check the label on the driver's side door jamb for the exact specifications.
The 2020 Kia Sorento uses a sealed transmission system. Checking the transmission fluid typically requires a visit to a service center. Consult your owner's manual for more information and recommended service intervals.
Engine knocking in the 2020 Kia Sorento can be caused by using the wrong fuel octane, low oil levels, or engine wear. Check the oil level and use the recommended fuel. If the noise persists, consult a mechanic for further diagnosis.
To enable rear cross-traffic alert, access the vehicle settings on the infotainment system. Navigate to the "Driver Assistance" section and ensure the rear cross-traffic alert option is turned on.