Kia Sorento 2016 Features and Functions Guide
![Kia Sorento 2016 SUV manual cover](/images/rcggvNtDHNpKkAKozeIDMMOg/thumbs/thumb175x175.webp)
For optimal performance, it is recommended to change the oil every 7,500 miles or 12 months, whichever comes first. However, if you frequently drive in severe conditions, consider changing it every 3,000 to 5,000 miles.
The 2016 Kia Sorento typically uses SAE 5W-30 synthetic oil. It's important to check the owner’s manual or consult with a dealer to ensure you're using the correct oil type for your specific engine.
To reset the TPMS, inflate all tires to the recommended pressure, then drive at a steady speed of 50 mph or more for about 10 minutes. The TPMS light should turn off. If it remains on, consult a professional for further diagnostics.
You can replace the key fob battery by opening the fob casing and replacing the old battery with a new CR2032 battery. Ensure the battery is placed with the positive side facing up.
To reset the infotainment system, press and hold the power button and the seek-up button simultaneously for about 10 seconds. The system will reboot and restore to factory settings.
The recommended tire pressure for a 2016 Kia Sorento is typically 34 psi for both front and rear tires. Always refer to the placard located on the driver's side door jamb for precise specifications.
To replace the air filter, open the hood and locate the air filter housing. Unclip the cover, remove the old filter, and insert a new one ensuring it is seated properly. Re-secure the housing.
Common causes include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the ignition system. A diagnostic scan tool can pinpoint the exact issue.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and drive smoothly without excessive acceleration or idling.
First, open the hood and locate the headlight assembly. Remove the power connector and dust cover, then unclip the bulb holder. Replace the old bulb with a new one, ensuring not to touch the glass, and reassemble in reverse order.