Kia Sedona 2017 Features and Functions Guide

To reset the TPMS in your 2017 Kia Sedona, turn on the vehicle and ensure it is in park. Locate the TPMS reset button under the steering wheel. Hold the button until the TPMS light blinks three times, then release it. Drive the vehicle for 20 minutes to allow the sensors to reset.
The recommended oil type for the 2017 Kia Sedona is 5W-30 synthetic oil. The engine's oil capacity is approximately 6.9 quarts with a new filter.
To pair your smartphone, turn on the Bluetooth on your phone and the vehicle's audio system. On the vehicle's screen, select 'Setup', then 'Bluetooth', and finally 'Add New Device'. Select 'Kia Motors' from the list on your phone and confirm the passkey to pair.
If the check engine light illuminates, ensure the gas cap is tightly secured, as a loose cap can trigger the light. If the light remains on, it is advisable to have the vehicle scanned for error codes at a service center to determine the cause.
The transmission fluid in the 2017 Kia Sedona should be changed approximately every 60,000 miles, or as recommended in the owner's manual, depending on driving conditions and frequency.
To replace the cabin air filter, open the glove box and remove the damper arm. Push in the sides of the glove box to lower it completely. Remove the filter cover, slide out the old filter, and insert the new one. Reassemble in reverse order.
To disable the automatic door lock feature, access the vehicle's settings via the infotainment system. Navigate to 'Vehicle Settings', then 'Door', and adjust the automatic lock settings according to your preference.
If the air conditioning is not blowing cold air, check the refrigerant levels and ensure the AC system is charged. Check for any visible leaks or damage to the AC components. If issues persist, have the system inspected by a qualified technician.
Programming a new key fob typically requires professional equipment and is best done at a Kia dealership or by a certified locksmith. They can program the new fob to the vehicle's system securely.
To jump-start your Kia Sedona, park a running vehicle close by and connect jumper cables: positive to positive terminals, then negative to a metal ground on the Sedona. Start the assisting vehicle and let it run for a few minutes, then attempt to start the Sedona.