Kenworth T180 2022 Instruction Manual
![Kenworth T180 2022 Truck manual cover](/images/JYgdWbFPkzlwEUHXoZzfIZvG/thumbs/thumb175x175.webp)
The recommended engine oil for the Kenworth T180 2022 is a high-quality 15W-40 diesel engine oil that meets the API CK-4 specification.
First, check the battery connections and charge. Ensure the fuel supply is adequate and the fuel filter is not clogged. Verify that the ignition switch and starter motor are functioning properly.
To change the air filter, locate the air filter housing, release the clips or screws, remove the old filter, and replace it with a new one, ensuring it is seated correctly before securing the housing.
The brakes on a Kenworth T180 2022 should be inspected every 10,000 miles or as specified in the maintenance schedule, and more frequently if the vehicle is used in severe conditions.
Regularly check and maintain the correct transmission fluid level, inspect for leaks, and adhere to the manufacturer's recommended service intervals for fluid and filter changes.
Reduced fuel efficiency can be caused by under-inflated tires, clogged air filters, poor quality fuel, or engine tuning issues. Ensure all systems are regularly maintained and functioning optimally.
To adjust the headlights, park the truck on a level surface facing a wall, mark the headlight beams, adjust the screws on the headlight assembly to align the beams to the desired height and direction.
Check the coolant level when the engine is cold by inspecting the coolant reservoir and ensuring it is between the minimum and maximum marks. Add coolant if necessary.
To reset the maintenance light, turn the ignition to the "on" position without starting the engine, use the menu controls on the dashboard to navigate to the maintenance section, and select the reset option.
If the ABS warning light is on, check the ABS sensors and wiring for damage or disconnection. If the issue persists, a diagnostic scan may be necessary to identify the specific fault.