Karcher WV 55 Operator's Manual
![Karcher WV 55 manual cover](/images/b95c173ad74e0092383f9f63/thumbs/thumb175x175.webp)
To charge the Karcher WV 55, connect the charger to the charging port on the device and plug it into a power outlet. The charging indicator will light up, showing that the device is charging. Once fully charged, the indicator will turn off.
If the WV 55 is leaving streaks, ensure the rubber blade is clean and free from damage. Also, check that the detergent concentration is correct and the window surface is not overly wet before using the device.
To clean the water tank, detach it from the device, remove the lid, and rinse it with warm water. Use a mild detergent if necessary, and ensure it is thoroughly rinsed to remove any soap residue.
If the WV 55 does not turn on after charging, check the power connection and ensure the battery is fully charged. If the issue persists, it may be a battery problem requiring replacement or servicing.
To replace the rubber blades, slide the old blade out from the holder, align the new blade, and slide it into place until it is secure. Ensure it is straight and properly seated in the holder.
Store the WV 55 in a dry, cool place away from direct sunlight. Ensure the water tank is empty and the device is clean before storage. Avoid storing it in a location where it could be knocked over or damaged.
Yes, the Karcher WV 55 can be used to clean car windows effectively. Ensure the windows are pre-washed to remove any heavy dirt before using the device for the best results.
The rubber blade should be replaced when it shows signs of wear or damage, such as nicks or tears. Regular inspection and replacement every few months, depending on usage, is recommended to maintain optimal performance.
Common issues include streaking, power problems, and poor suction. Ensure the device is charged, the blade is clean and undamaged, and the water tank is properly seated. Consult the user manual for further troubleshooting tips.
The Karcher WV 55 is generally safe for tinted windows, but it's recommended to test on a small area first to ensure no damage occurs. Ensure there are no sharp particles on the blade that could scratch the tint.