Contents

Machine Parts List
- 1. Water Inlet
- 2. High Pressure Outlet
- 3. Hose Connector
- 4. ON/Off Pedal
- 5. Power Cord Cleat
- 6. Nozzles
- 7. Turbo Nozzle
- 8. High Pressure Hose
- 9. Spray Wand
- 10. Spray Gun
- 11. Handle
- 12. Plug Storage
- 13. Wheel
- 14. Detergent Tank
- 15. Power Cord
K2100PS Pressure Washer
Contents
Specifications
Customer Service
Registration
Warranty
USA Customer Service
Canada Customer Service
Mexico Customer Service
Safety Instructions
Hazard Levels
Important Safety Instructions
Water Supply (Cold Water Only)
Ground Fault Circuit Interrupter Protection
Intended Use
Owner/User Responsibility
Assembly Instructions
- 1. Insert wheels into the body of the machine. Secure with axle pin.
- 2. Push the handle into place.
- 3. Install the hose connector to the water inlet.
- 4. Attach nozzles to handle.
- 5. Thread one end of the high pressure hose tightly onto the high pressure outlet on the unit.
- 6. Thread the other end of the high pressure hose onto the spray gun inlet.
Initial Start-Up
- 1. Thread the garden hose onto the water inlet connector and hand tighten.
- 2. Connect the garden hose to the cold water source and turn the water completely on.
- 3. Attach the spray wand to the spray gun by pressing the gun into the wand and hand tightening the threading of the gun onto the wand.
- 4. Pull the lever on the trigger gun to make sure that water is flowing freely and that all air has been purged from the device.
GFCI Instructions
- 1. Plug the Ground Fault Circuit Interrupter (GFCI) into a working outlet.
- 2. Press TEST, then press RESET to assure proper connection.
Operation Instructions
High Pressure Operation
- 1. Install the nozzle with the quick connect on the end of the wand by pulling the collar back, inserting the soap nozzle, then pushing the collar back. Check to make sure that Nozzle is secure.
- 2. Turn on the machine by stepping down on the foot pedal. The motor starts when the trigger of the gun is pulled and shuts off when the trigger is released.
- 3. Unlock the Spray Gun safety lock. Switch on the device by pulling on the lever of the trigger gun.
- 4. Switch off the device by releasing the lever of the trigger gun. High pressure remains in the device.
Using the Accessories
Using the Nozzles
Working with Detergents
- 1. Install the soap nozzle into the quick connect on the end of the wand by pulling the collar back, inserting the soap nozzle, then pushing the collar back. Check to make sure that Nozzle is secure.
- 2. Fill the soap tank with Krcher detergent.
- 3. Turn on the pressure washer by stepping on the foot pedal. Pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
- 4. To rinse, replace the soap nozzle with the 15 nozzle and pull trigger to operate.
- 5. Cleaning Up: Always run fresh water through the detergent tank when done to flush any remaining detergents from the injection system.
Taking a Break
five minutes or more
- 1. Release trigger and engage gun safety lock.
- 2. Turn pressure washer OFF by stepping on the foot pedal.
Shutting Down & Cleaning Up
- 1. Turn the machine off by stepping on the foot pedal and unplug the cord from the outlet.
- 2. Turn off the water source.
- 3. Press trigger to release water pressure.
- 4. Release trigger and engage the gun safety lock.
- 5. Disconnect the garden hose from the water inlet on the machine.
- 6. Unthread and disconnect the high pressure hose from the machine.
Winterizing & Long Term Storage
- 1. Disconnect all water connections.
- 2. Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.
- 3. Do not allow high-pressure hose to become kinked.
- 4. Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnace or other sources of heat as it may dry out the pump seals.
Maintenance Instructions
Cleaning the Water Inlet Filter
- 1. Disconnect the connector from the water inlet.
- 2. Rinse out the water inlet filter in warm water.
- 3. Thread the connector into the water inlet.
Maintenance
Cleaning Tips
Deck Cleaning
House Siding
Cement Patios, Brick and Stone
Cars, Boats and Motorcycles
Barbecue Grills, Outdoor Power Equipment and Gardening Tools
Patio and Lawn Furniture
Optional Accessories
Pump Guard
Troubleshooting
K2100PS Pressure Washer
Contenu
Spcifications
Symbole d'alerte de scurit
Mesures De Scurit Importantes
Approvisionnement En Eau (Eau Froide Seulement)
Protection par disjoncteur diffrentiel de fuite la terre
Instructions De Montage
- 1. Insrer les roues dans le corps de la machine. Fixer la tige d'essieu.
- 2. Tirer la poigne en place.
- 3. Installer le raccord de boyau sur l'entre d'eau.
- 4. Fixez les buses au pistolet.
Instructions De Fonctionnement
- 1. Vissez une extrmit du tuyau haute pression fermement sur la sortie haute pression de l'appareil.
- 2. Vissez l'autre extrmit du tuyau haute pression sur l'entre du pistolet.
- 3. Insrer le tube de vaporisation dans le pistolet vaporisateur. L'appuyer contre le ressort tenseur et tourner en position verrouille.
- 4. Visser le boyau d'arrosage dans le raccord d'entre d'eau et serrer la main.
- 5. Raccorder le boyau d'arrosage la source d'eau froide et ouvrir l'eau compltement.
- 6. Brancher le disjoncteur diffrentiel de fuite la terre (DDFT) dans une prise qui fonctionne. Nous vous recommandons de tester le DDFT dans le cadre de la procdure de dmarrage chaque fois que vous utilisez la machine. Pour apprendre comment...
- 7. Dverrouiller le verrou de scurit du pistolet vaporisateur. Dclencher le pistolet pour liminer l'air emprisonn. Attendre qu'un flux constant d'eau merge de la buse de vaporisation.
- 8. Actionner la machine et appuyant sur la pdale.
Utilisation Des Accessoires
Utilisation des Buses
Travailler Avec Des Dtergents
- 1. Installer la buse savon au raccord rapide l'extrmit du tube.
- 2. Remplir le rservoir de savon avec le dtergent Krcher.
- 3. Actionner la machine laver pression en appuyant sur la pdale. Tirer sur le dclencheur pour actionner l'appareil. Le dtergent liquide est aspir dans l'appareil et mlang avec l'eau. Appliquer le dtergent la zone de travail. Ne...
- 4. Pour rincer, remplacer la buse savon par la buse 15 et tirer sur le dclencheur pour actionner.
- 5. Nettoyage : Toujours faire couler de l'eau frache travers le rservoir de dtergent lorsque vous avez termin afin de rincer le dtergent restant du systme d'injection.
Prendre Une Pause...cinq minutes ou plus
- 1. Relchez la gchette et mettez le verrou de scurit du pistolet.
- 2. Arrter la machine laver pression en appuyant sur la pdale.
Arrt Et Entretien
- 1. Arrter la machine en appuyant sur la pdale et en dbranchant le cordon de la prise.
- 2. Fermez la source d'eau.
- 3. Appuyez sur la gchette pour relcher la pression d'eau.
- 4. Relchez la gchette et mettez le verrou de scurit du pistolet.
- 5. Dbrancher le boyau d'arrosage de l'entre d'eau de la machine.
- 6. Dvisser et dbrancher le boyau haute pression de la machine.
Entreposage Long Terme Et Pour Hiver
- 1. Dbranchez tous les raccords d'eau.
- 2. Faites fonctionner l'appareil pendant quelques secondes, jusqu' ce que l'eau qui restait dans la pompe sorte. Arrtez immdiatement le moteur.
- 3. vitez de plier le boyau haute pression.
- 4. Rangez l'appareil et les accessoires dans un endroit o il n'y a pas de risque de gel. NE rangez PAS l'appareil prs d'une fournaise ou d'autres sources de chaleur puisque cela pourrait asscher les joints d'tanchit de la pompe.
Instructions D'entretien
Nettoyage du filtre d'entre d'eau
- 1. Dbrancher le raccord de l'entre d'eau.
- 2. Rincer le filtre d'entre d'eau dans l'eau chaude.
- 3. Visser le raccord dans l'entre d'eau.
Entretien
Conseils De Nettoyage
Nettoyage de la terrasse
Parements de maison
Patio de ciment, de briques et de pierres
Automobiles, bateaux et motocyclettes
Barbecues, quipements motoriss d'extrieur et outils de jardin
Patio et meubles de jardin
Accessoires optionnels
Pump Guard
Guide De Dpannage

Karcher K2100PS 1.106-220.0 Operator's Manual

Karcher K2100PS 1.106-220.0 manual cover

Pages 38

Year 0

Language(s)

of 38

Karcher K2100PS 1.106-220.0 Specification

The Karcher K2100PS 1.106-220.0 is a versatile and efficient pressure washer designed for both residential and light commercial use. It features a robust 2100 PSI output with a flow rate of 1.3 GPM, providing powerful cleaning performance for a variety of surfaces including vehicles, driveways, and outdoor furniture. The unit is equipped with a durable, maintenance-free N-COR pump that ensures long-lasting reliability and consistent pressure delivery. Its compact, lightweight design incorporates an ergonomic handle and oversized rear wheels, facilitating easy maneuverability across different terrains.

The K2100PS includes an integrated detergent tank that allows for seamless soap application, enhancing the cleaning process for tougher grime and dirt. It also comes with a 25-foot high-pressure hose and an onboard hose reel for convenient storage and extended reach. The pressure washer is fitted with a Quick Connect system, enabling rapid attachment and detachment of accessories and nozzles. It is supplied with three spray nozzles, including a turbo nozzle for intensive cleaning tasks, providing versatile functionality for various cleaning needs.

Safety and ease of use are prioritized with an automatic safety valve and a total stop system that shuts off the motor when the trigger is released, conserving energy and prolonging motor life. The Karcher K2100PS is engineered to deliver effective cleaning power while maintaining user-friendly operation, making it an ideal choice for users seeking both performance and convenience in a pressure washing solution.

Karcher K2100PS 1.106-220.0 F.A.Q.

How do I assemble the Karcher K2100PS pressure washer for the first use?

To assemble the Karcher K2100PS, start by attaching the handle to the main body using the provided screws. Connect the high-pressure hose to the gun and the unit. Lastly, attach the water inlet filter and connect the garden hose to the inlet. Ensure all connections are secure before operation.

What should I do if the Karcher K2100PS does not start?

First, check if the power cord is properly connected and that the outlet is functional. Ensure the power switch is set to the 'ON' position. If the issue persists, inspect the fuse or circuit breaker. If necessary, consult the user manual for further troubleshooting steps.

How often should I clean the water inlet filter?

The water inlet filter should be checked and cleaned after every few uses, especially if the water supply is from a source with potential debris. Regular cleaning ensures optimal performance and prolongs the machine's lifespan.

What is the recommended maintenance schedule for the Karcher K2100PS?

Regular maintenance includes inspecting hoses and seals for damage, cleaning the water filter, and checking the power cord for wear. It is recommended to perform these checks monthly or after every 10 uses. Additionally, store the unit in a dry, frost-free place.

How can I prevent the pressure washer from overheating?

To prevent overheating, avoid running the pressure washer for extended periods without breaks. Ensure adequate water supply and avoid kinking the hose. If the unit overheats, turn it off and allow it to cool before resuming use.

What type of detergent should I use with the Karcher K2100PS?

Use only detergents specifically designed for pressure washers. Karcher offers a range of compatible detergents for various cleaning tasks. Always follow the manufacturer's instructions when mixing and applying detergent.

How do I troubleshoot low pressure output from the Karcher K2100PS?

Check for blockages in the spray nozzle and clean if necessary. Ensure the water supply is adequate and that hoses are not leaking. Inspect the filter for debris and clean it. If low pressure persists, consult the user manual or contact customer support.

Can I use hot water with the Karcher K2100PS pressure washer?

The Karcher K2100PS is designed for use with cold water. Using hot water can damage the pump and other components. Always adhere to the manufacturer's recommendations regarding water temperature.

How do I store the Karcher K2100PS during winter months?

Before storing, drain all water from the unit to prevent freezing damage. Store the pressure washer in a dry, frost-free environment. If possible, keep it in a heated space to avoid temperature fluctuations.

What are the safety precautions when using the Karcher K2100PS?

Always wear protective eyewear and gloves during operation. Ensure the area is clear of obstacles and people. Do not point the spray gun at people or animals. Follow all safety instructions in the user manual to prevent accidents and injuries.