Karcher K 2 Entry Operator's Manual
![Karcher K 2 Entry manual cover](/images/f2b337e5be4253b7836a7023/thumbs/thumb175x175.webp)
To assemble the Karcher K 2 Entry, first attach the high-pressure hose to the spray gun and unit. Then, connect the garden hose adapter to the water inlet. Ensure all connections are secure before use.
After use, disconnect the water supply and switch off the unit. Drain any remaining water from the unit and hoses. Store in a dry, frost-free place to prevent damage.
Check if the water supply is adequate and that there are no kinks in the hose. Ensure the inlet filter is clean and that the spray nozzle is not blocked.
To clean the filter, remove it from the water inlet using a pair of pliers. Rinse it under running water to remove any debris and reinstall it carefully.
Check all hose connections for tightness. Inspect hoses and fittings for cracks or damage. Replace any faulty parts as needed.
Regularly check hoses, connections, and the filter for wear or blockages. It is recommended to perform a thorough inspection every few months, depending on usage frequency.
Yes, you can use detergent by filling the detergent tank or using the suction tube. Adjust the nozzle to low-pressure mode to apply the detergent.
Ensure the power supply is connected and the socket is functioning. Check the extension cord for any damage. Make sure the power switch is in the 'on' position.
Always wear protective goggles and gloves. Do not aim the spray at people, animals, electrical devices, or the machine itself. Ensure the unit is on a stable surface.
Regular maintenance, proper storage, and using the machine within its operational guidelines will help ensure its longevity. Avoid using unapproved accessories or detergents.