Karcher K 2 Car and Home Kit Operator's Manual
![Karcher K 2 Car and Home Kit manual cover](/images/b57857455a6e4a8394cfbf5c/thumbs/thumb175x175.webp)
Begin by attaching the high-pressure hose to the spray gun and the machine. Connect the water supply to the Karcher unit, ensuring all connections are secure. Plug in the device and switch it on.
Check that the power cord is connected to a working outlet and that the power switch is in the 'on' position. Inspect the fuse and replace it if necessary. Ensure the high-pressure hose is properly attached.
Regularly clean the water filter to prevent blockages. Inspect hoses and connections for wear or damage. Store the unit in a dry, frost-free place to prevent damage from freezing temperatures.
Fill the detergent tank with Karcher-approved detergent. Attach the detergent suction hose to the unit. Use the spray lance to apply detergent at low pressure. Rinse with clean water after use.
Ensure the water supply is fully open and the hose is not kinked. Check for any blockages in the spray lance or nozzle. Clean the water filter and inspect for any leaks in connections.
Inspect all hoses and connections for cracks or damage. Ensure all fittings are tight and secure. Replace any damaged parts as necessary.
Disconnect the unit from the power supply and water source. Drain any remaining water from the machine and hose. Store in a dry, frost-free environment to prevent damage.
The kit includes a Vario Power spray lance, dirt blaster, a high-pressure hose, and a T 150 patio cleaner. Additional accessories for car cleaning may also be included.
Clean the water filter after every 5-10 uses or whenever you notice a reduction in pressure. This helps maintain optimal performance and prevents damage.
The Karcher K 2 is designed for use with cold water. Using hot water can damage the internal components and void the warranty.