Karcher HD 5.0 50 Eb Cage 1.107-084.0 Operator's Manual

Ensure the unit is connected to a power source and water supply. Turn the power switch to the 'ON' position and squeeze the trigger on the spray gun to start the motor.
Check the power supply and ensure the unit is plugged in. Verify that the circuit breaker is not tripped and the power switch is in the 'ON' position.
Regularly check and clean the water filter, inspect hoses and connections for leaks, and ensure the spray nozzle is free of debris.
Drain all water from the unit, disconnect the hoses, and store the pressure washer in a dry, sheltered place. Consider using a pump saver antifreeze solution.
Check for blockages in the spray tip or hose, ensure the water supply is adequate, and inspect the unloader valve for proper function.
Turn off the pressure washer and disconnect the spray wand. Use a nozzle cleaning tool or a thin wire to remove any debris from the nozzle.
Use detergents specifically designed for pressure washers. Avoid using bleach or corrosive chemicals, as they can damage the machine.
Check the oil level before each use, and change it after the first 50 hours of operation, then every 300 hours or annually.
Inspect the hoses and connections for cracks or looseness. Check the seals and O-rings for wear and replace them if necessary.
Yes, but use a low-pressure nozzle and keep a safe distance to prevent surface damage. Test on a small area first.