Karcher FC 7 Cordless FC 7 Cordless Premium Operator's Manual
![Karcher FC 7 Cordless FC 7 Cordless Premium manual cover](/images/8bee770907a3c6634d4466e1/thumbs/thumb175x175.webp)
To assemble the Karcher FC 7 Cordless, start by attaching the handle to the main body until it clicks into place. Then, insert the water tank and ensure it is securely fastened. Finally, attach the rollers as per the instruction manual.
To maintain the rollers, rinse them under running water after each use. For a deeper clean, you can wash them in a washing machine at up to 60°C. Ensure they are completely dry before reattaching.
If the device is not turning on, ensure that it is charged. Check the battery level indicator and charge the device if necessary. If the problem persists, inspect for any visible damage or contact Karcher customer support.
To clean the water tank, remove it from the device and rinse it with warm water. Use a mild detergent if necessary, and ensure it is thoroughly rinsed and dried before reattaching it to the cleaner.
It is recommended to use Karcher-approved cleaning solutions to ensure optimal performance and avoid damage. Using non-recommended solutions may void the warranty.
Check for blockages in the suction channel and clean the filter. Ensure the rollers are not clogged and verify that the water tank is correctly fitted. If the issue persists, consult the user manual or contact support.
The Karcher FC 7 Cordless takes approximately 4 hours to fully charge. Ensure the charger is properly connected and check the charging indicator for confirmation.
Store the FC 7 Cordless in a dry place, away from direct sunlight and extreme temperatures. Ensure the device is clean and completely dry before storage. Keep the device upright to prevent damage.
The rollers should be replaced every 6-12 months, depending on usage. Inspect them regularly for wear and tear, and replace them if they are damaged or not cleaning effectively.
Ensure the rollers are clean and properly attached. Check the cleaning solution concentration and adjust if necessary. Also, verify that the water tank is correctly positioned and not leaking.