Infiniti QX80 2016 Quick Reference Guide
![Infiniti QX80 2016 SUV manual cover](/images/gxzDbsTojevqVvKxNyZFcjqY/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the menu button on the steering wheel to navigate to the settings menu. Select "Maintenance," then choose the type of maintenance you want to reset (e.g., engine oil), and follow the prompts to reset.
The 2016 Infiniti QX80 typically requires SAE 0W-20 full synthetic oil. Always refer to the owner’s manual for confirmation and to ensure compatibility with your vehicle.
To improve fuel efficiency, ensure tires are properly inflated, use the recommended grade of motor oil, maintain a steady speed, reduce excess weight in the vehicle, and keep up with regular maintenance such as air filter and spark plug replacements.
The recommended tire pressure for the 2016 Infiniti QX80 is typically 35 PSI for both front and rear tires. Always check the placard on the driver's side door jamb for the most accurate information.
To pair your phone, go to the "Settings" menu on your vehicle's infotainment screen, select "Bluetooth," and turn it on. On your phone, enable Bluetooth and search for the Infiniti system. Select it to connect and follow any additional prompts.
If the navigation system is not working, try restarting the system by turning the vehicle off and back on. Ensure the SD card is properly inserted if your system uses one. If issues persist, consult the owner’s manual or contact a dealership for further assistance.
To change a flat tire, first ensure the vehicle is parked on a flat surface and turn on hazard lights. Loosen the lug nuts slightly, then use the jack to lift the vehicle. Remove the lug nuts and the flat tire, then mount the spare tire. Tighten the lug nuts in a star pattern and lower the vehicle. Finally, ensure all lug nuts are securely tightened.
The 2016 Infiniti QX80 has a towing capacity of up to 8,500 pounds, provided it is properly equipped. Always refer to your owner’s manual for specifications and ensure your vehicle is equipped with the necessary towing accessories.
To replace the cabin air filter, locate the filter housing behind the glove compartment. Open the glove box and remove any contents. Detach the dampener arm and squeeze the sides of the glove box to drop it down. Remove the filter cover, take out the old filter, and insert the new one. Reassemble in reverse order.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If none are found, it's advisable to have the vehicle scanned for error codes at a professional service center to diagnose the problem accurately.