Infiniti QX60 Hybrid 2015 Dismantling Guide
![Infiniti QX60 Hybrid 2015 SUV manual cover](/images/HpHmfCfsnZQkhiITOfNlSmFH/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the arrow buttons on the steering wheel to navigate to the "Settings" menu on the dashboard display. Select "Maintenance," then choose the service you want to reset, such as "Engine Oil" or "Tire Rotation," and follow the prompts to reset the indicator.
The recommended oil type for the Infiniti QX60 Hybrid 2015 is SAE 0W-20 full synthetic oil. It is important to use the correct oil type to ensure optimal engine performance and fuel efficiency.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements. Keep tires properly inflated and avoid carrying unnecessary weight. Use cruise control on highways and drive at steady speeds. Additionally, use the ECO driving mode to optimize hybrid performance.
A squealing noise when braking often indicates worn brake pads. Check the brake pads for wear and replace them if necessary. If the pads are in good condition, inspect the rotors and calipers for any damage or debris that might cause noise.
To pair your phone, press the "Phone" button on the infotainment system. Select "Connect Device" and ensure Bluetooth is enabled on your phone. Choose your vehicle's Bluetooth name from the list on your phone and confirm the pairing request. Enter the passkey if prompted.
If the hybrid system warning light illuminates, it indicates a potential issue with the hybrid system. Safely pull over and turn off the engine. Restart the vehicle to see if the light clears. If it remains on, consult the owner's manual and contact an Infiniti dealer for diagnosis and repair.
The air filter should be inspected at every oil change and replaced every 15,000 to 30,000 miles, depending on driving conditions. For dusty or polluted environments, more frequent replacement may be necessary to maintain engine performance.
Yes, you can tow with the Infiniti QX60 Hybrid 2015. The maximum towing capacity is 3,500 pounds when properly equipped. Ensure your vehicle is fitted with the appropriate towing package and always follow the manufacturer's guidelines for safe towing.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery and the positive terminal of the live battery. Connect one end of the negative cable to the negative terminal of the live battery and the other end to an unpainted metal surface on the engine block of the dead vehicle. Start the live vehicle, then attempt to start the Infiniti. Remove cables in reverse order after starting.
To replace the key fob battery, locate the small release button on the back of the key fob. Press it to remove the mechanical key. Use a flathead screwdriver to gently pry open the key fob casing. Remove the old battery and insert a new CR2025 battery with the positive side facing up. Reassemble the key fob and test its functionality.