Indesit MTWC 91484 W UK Quick Guide
![Indesit MTWC 91484 W UK Washing Machine manual cover](/images/xlLErecQDAUQQIKjrIRQVWLL/thumbs/thumb175x175.webp)
To install the Indesit MTWC 91484 W UK washing machine, first ensure the machine is placed on a level surface. Connect the inlet hose to a cold water supply and attach the drain hose to a suitable drainage point. Plug the machine into a power outlet and ensure the transit bolts are removed.
If the washing machine is not starting, check if it is properly plugged in and if the power socket is functional. Ensure the door is closed securely and the water supply is turned on. Verify that the selected program is set correctly and press the "Start/Pause" button.
To clean the detergent drawer, gently pull it out until it stops, then press the release lever to remove it completely. Wash the drawer under running water with a brush to remove any detergent residue. Reinsert the drawer into its slot until it clicks into place.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, wiping the rubber door seal, and running a maintenance wash with a drum cleaner to prevent mold and odors.
Excessive vibration may occur if the washing machine is not level. Adjust the feet to ensure stability. Unevenly distributed laundry can also cause vibration, so try redistributing the load. Check if the transit bolts have been removed if the machine is newly installed.
To reset the Indesit washing machine, unplug it from the power source for about 30 seconds. Plug it back in, then select the desired program and press the "Start/Pause" button to begin a new cycle.
If water is not draining, check if the drain hose is kinked or blocked. Inspect and clean the pump filter located at the bottom front of the machine. Ensure that the drain hose height is within the recommended range to prevent siphoning.
To prevent odors, leave the door and detergent drawer open after each wash to allow air circulation. Use the correct amount of detergent and run a regular maintenance wash with a washing machine cleaner to eliminate residues and mold.
For optimal performance, distribute clothes evenly around the drum and avoid overloading. Follow the manufacturer's guidelines for load capacity and select the appropriate wash program based on fabric type and soil level.
If the washing machine is leaking, check the inlet and drain hoses for any leaks or loose connections. Inspect the door seal for damage or debris. Ensure the detergent drawer is not overfilled and is closed properly.