Indesit IWC 71453 W UK N Quick Guide

To start a wash cycle, first load your laundry into the drum and add detergent. Turn the dial to select your desired wash program. Press the 'Start/Pause' button to begin the cycle.
Check if the drain hose is kinked or blocked. Make sure the drain pump filter is not clogged. Refer to the user manual for instructions on cleaning the filter.
Remove the detergent drawer by pulling it out until it stops, then press the lever down to fully remove it. Rinse under warm water and clean any residue before replacing.
Regularly clean the detergent drawer, drum, and door seal. Check and clean the pump filter every month. Ensure that the machine is level to prevent excessive vibration.
After selecting your wash program, press the 'Delay Timer' button to set the desired delay time. The machine will start automatically after the set time has elapsed.
Ensure that the machine is level by adjusting the feet. Make sure the load is balanced and not overloaded. Check that transit bolts have been removed if the machine is new.
Leave the door open after washes to allow the interior to dry. Run a maintenance wash with hot water and vinegar or a washing machine cleaner monthly.
Refer to the user's manual to identify the error code. Common errors include issues with water supply, drainage, or door lock. Follow the troubleshooting steps provided.
Yes, you can pause the cycle by pressing the 'Start/Pause' button. Wait for a few seconds until the door lock indicator turns off, then open the door to add laundry.
Wash full loads whenever possible, use lower temperature settings, and select shorter wash cycles for lightly soiled clothing to save energy and water.