Indesit Innex BWE 71452 K UK N Quick Guide
![Indesit Innex BWE 71452 K UK N Washing Machine manual cover](/images/JAXuAMOdBEWyHMSDVxFifalF/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, close the door securely, select the desired wash program using the control dial, and press the start button.
Ensure the machine is plugged in and switched on. Check the door is closed properly, and verify that you have selected a program and pressed the start button. If the issue persists, check the fuse or circuit breaker.
Remove the detergent drawer by pulling it out until it stops, then press the release lever to fully remove it. Wash the drawer under warm water to remove any detergent residue, dry it, and replace it in the machine.
Regularly clean the detergent drawer and door seal, check and clean the filter, and run a maintenance wash with an empty drum using a washing machine cleaner to remove any build-up.
Ensure the washing machine is level by adjusting the feet. Avoid overloading the machine and ensure the load is balanced. Check for any transit bolts that may not have been removed during installation.
Check the drain hose for kinks or blockages. Inspect the pump filter for debris and clean it if necessary. Ensure the drain hose is not inserted too far into the standpipe.
Use lower temperature settings, wash full loads, and choose energy-efficient wash programs. Regular maintenance can also help the machine run more efficiently.
The 'F05' error code indicates a problem with the pump or the filter. Check the pump filter for blockages and ensure the pump is functioning properly.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and perform maintenance washes using a washing machine cleaner.
Use the dedicated 'Delicate' program which uses a gentle wash action and lower spin speeds to protect delicate fabrics. Use a mild detergent and place items in a laundry bag if needed.