Hot Wheels Star Wars Flight Controller CKB11 Manual

To sync the Flight Controller with your vehicle, turn on both devices. Press the sync button on the controller until the LED starts flashing, then press the sync button on the vehicle. They should automatically pair within a few seconds.
If the controller is unresponsive, try resetting it by removing and reinserting the batteries. Ensure the batteries are fresh and correctly installed. If the problem persists, consult the manual for troubleshooting steps.
To change the batteries, locate the battery compartment on the back of the controller. Use a screwdriver to open the compartment, remove the old batteries, and insert new ones, ensuring correct polarity. Secure the compartment after replacing the batteries.
Yes, rechargeable batteries can be used in the Flight Controller. Ensure they are fully charged before use and check the manufacturer's guidelines for any specific battery recommendations.
The Flight Controller has a range of approximately 30 meters (about 100 feet) in open spaces. Obstacles and interference may reduce this range.
Ensure the controller and vehicle have fresh batteries, and operate them in an open area free from obstacles and electronic interference. Regularly clean the controller and vehicle to maintain optimal performance.
Check if both the controller and vehicle are turned on and properly synced. Replace the batteries if necessary and ensure there are no obstructions or interference between the devices.
Use a soft, dry cloth to clean the controller. Avoid using water or cleaning solvents. Regularly check for dirt or debris in the buttons and battery compartment to ensure proper function.
The Flight Controller does not have a factory reset option. You can troubleshoot by turning off the device, removing the batteries, and restarting the syncing process.
If the controller's LED is dim or the vehicle responds sluggishly, it may be time to replace the batteries. Always keep spare batteries on hand for uninterrupted play.