Hot Wheels RC Fury FTX H9305 Manual
![Hot Wheels Mattel RC Fury FTX H9305 Toy manual cover](/images/AEVBExQOBqyhmPghkbpEbnvv/thumbs/thumb175x175.webp)
To pair the remote control, first ensure that both the RC car and the remote are turned off. Turn on the RC car, then immediately turn on the remote while holding down the pairing button until the LED lights indicate a successful connection.
The Hot Wheels Mattel RC Fury FTX H9305 requires 4 AA batteries for the vehicle and 2 AA batteries for the remote control. Make sure to use fresh, high-quality batteries for optimal performance.
If you experience connectivity issues, try replacing the batteries in both the car and the remote. Ensure that there are no obstacles or electronic interference between the remote and the car. Re-pair the devices if necessary.
Check to ensure that the batteries are correctly installed and have sufficient charge. Inspect the car's power switch to confirm it is in the 'on' position. If the issue persists, re-pair the remote with the car.
Regularly clean the car to prevent dirt build-up, particularly around the wheels and axles. Store the car and remote in a dry place. Remove batteries if the car will not be used for an extended period to prevent leakage.
Yes, the Hot Wheels Mattel RC Fury FTX H9305 can be used outdoors, but it is recommended to avoid wet or muddy conditions to prevent damage to the electronics and mechanical parts.
To improve the range, ensure the batteries in the remote are fresh and fully charged. Avoid using the RC car in areas with high electronic interference, and keep the antenna on the remote in a vertical position.
Use a soft, damp cloth to wipe down the exterior of the car. For stubborn dirt, use a mild soap solution and ensure to dry the car thoroughly afterwards. Avoid using water near the battery compartment.
Check for debris or obstructions around the wheels and axles. Clean as necessary and ensure that all screws and connections are secure. If the problem persists, consult the user manual or contact customer support.
Store the RC car and remote in a cool, dry place away from direct sunlight. Remove the batteries from both the car and remote to prevent leakage and damage during storage.