Hitachi KH337E Instruction Manual

To set the time, press and hold the 'Time Set' button until the display starts blinking. Use the 'Hour' and 'Minute' buttons to adjust the time accordingly. Press 'Time Set' again to confirm.
First, ensure that the radio is plugged into a working power outlet. Check the power cord for any damage. If using batteries, replace them with fresh ones. If the issue persists, consult the user manual or contact customer support.
For better reception, extend the antenna fully and try repositioning it. Avoid placing the radio near electronic devices that might cause interference. If indoors, place the radio near a window.
The Hitachi KH337E Radio does not support Bluetooth connectivity. You can use an auxiliary cable to connect your phone to the radio's AUX input for playback.
To reset the radio, locate the 'Reset' button, usually found at the back or bottom of the unit. Press and hold it for 5 seconds using a pointed object like a paperclip. The radio will reset to its default settings.
Press the 'Alarm Set' button until the alarm time display blinks. Use the 'Hour' and 'Minute' buttons to set the desired alarm time. Press 'Alarm Set' again to confirm. Ensure the alarm function is turned on.
Check if the volume is turned up and the mute function is off. Make sure the radio is tuned to a station with a clear signal. If using external speakers, check the connections.
To clean the radio, unplug it and use a soft, dry cloth to wipe the surface. Avoid using liquids or abrasive cleaners. Regularly check for dust buildup in the speaker grills and gently clean them.
Press the 'Band' button on the radio to toggle between AM and FM bands. The display will indicate the current band selection.
Ensure the radio is connected to power. If using batteries, replace them. Check for any visible damage to the display. If the problem persists, consult the user manual or contact customer support for assistance.