Hitachi KC120E Instruction Manual
![Hitachi KC120E manual cover](/images/uFBKWQToQGXszNKMkETujeeH/thumbs/thumb175x175.webp)
To tune the Hitachi KC120E Radio, turn the tuning knob until you find the desired station frequency displayed on the screen. For digital tuning, use the seek buttons to automatically find strong stations.
First, check that the radio is plugged into a working power outlet. Ensure that the power cord is securely connected to the radio. If using batteries, confirm they are inserted correctly and have sufficient charge.
To improve reception, extend the radio's antenna fully and adjust its position. Place the radio near a window or away from electronic devices that may cause interference.
Press the 'Alarm' button on the radio, then use the hour and minute buttons to set the desired alarm time. Confirm the settings by pressing the 'Set' button.
To reset the radio, locate the reset button, usually at the back of the unit or within the battery compartment. Use a pointed object to press and hold the reset button for a few seconds until the radio resets.
Ensure Bluetooth is enabled on your smartphone. Put the radio into pairing mode by pressing the Bluetooth button. Select 'Hitachi KC120E' from the list of available devices on your phone to pair.
Check the volume settings and ensure they are not too high, which might cause distortion. Verify that the speaker is not obstructed and try tuning to a different station to see if the issue persists.
Open the battery compartment located at the back of the radio. Remove the old batteries and insert new ones, ensuring the correct polarity. Close the compartment securely.
Yes, you can. Ensure the radio is in Bluetooth mode and visible. On your laptop, enable Bluetooth and select 'Hitachi KC120E' from the list of available devices to connect.
Keep the radio clean by wiping it with a soft, dry cloth. Avoid exposing it to extreme temperatures or moisture. Regularly check and replace batteries if needed, and ensure the antenna is in good condition.