GMC Yukon XL Denali 2016 Getting To Know Your Manual
![GMC Yukon XL Denali 2016 manual cover](/images/JpRzBlJjheHnOPqFyReAUhgl/thumbs/thumb175x175.webp)
The recommended oil type for the 2016 GMC Yukon XL Denali is SAE 0W-20 full synthetic motor oil.
To reset the oil life monitoring system, turn on the ignition without starting the engine. Use the DIC controls to navigate to the "Oil Life" screen, then press and hold the "SET/CLR" button until the display shows 100%.
The 2016 GMC Yukon XL Denali has a maximum towing capacity of 8,100 pounds when properly equipped.
To pair your smartphone, enable Bluetooth on your device, then access the Bluetooth settings on the vehicle's infotainment system. Select your device from the list and confirm the pairing code displayed on both the vehicle and device.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber dust cover, and turn the bulb socket counterclockwise to remove it. Replace with a new bulb and reassemble.
It is recommended to change the transmission fluid every 45,000 miles under severe conditions or every 90,000 miles under normal conditions.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light remains on, have the vehicle diagnosed with an OBD-II scanner to determine the specific error code.
To replace the cabin air filter, open the glove box and remove the limiting arm. Push in on the sides to lower the glove box completely. Remove the filter cover and replace the old filter with a new one, ensuring the airflow direction arrow is correct.
The recommended tire pressure for the 2016 GMC Yukon XL Denali is 35 psi for both front and rear tires. Always check the tire pressure when the tires are cold.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements, maintain proper tire pressure, drive at steady speeds, and reduce unnecessary idling.