GMC Terrain 2014 Getting To Know Your Manual
![GMC Terrain 2014 manual cover](/images/aHApdpKUZlCoSgxQqCQbzKbs/thumbs/thumb175x175.webp)
To reset the oil life indicator: Turn the ignition to the "On" position without starting the engine. Press the "MENU" button until "Vehicle Information" menu is displayed. Use the arrow keys to scroll to "Oil Life". Press the "SET/CLR" button and confirm by selecting "Yes" when prompted.
The 2014 GMC Terrain typically requires 5W-30 full synthetic oil. Always refer to the owner's manual for the most accurate information for your specific vehicle configuration.
A "Check Engine" light could indicate various issues, from a loose gas cap to a more serious engine problem. It's best to use an OBD-II scanner to read the trouble codes, or take it to a professional mechanic for a diagnostic.
To improve fuel efficiency: Ensure tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, drive at steady speeds, and reduce excess weight in the vehicle.
In the 2014 GMC Terrain, the spare tire is located under the cargo area floor in the rear of the vehicle. Lift the floor panel to access the spare tire and tools.
To pair your smartphone: Turn on the vehicle and enable Bluetooth on your phone. Use the radio display to navigate to the Bluetooth settings and select "Pair Device". Follow the prompts on both the display and your phone to complete the pairing process.
The 2014 GMC Terrain has a towing capacity of up to 3,500 pounds when properly equipped. This requires the optional V6 engine and trailering package.
It's recommended to inspect the air filter every 15,000 miles and replace it every 30,000 miles, or as needed depending on driving conditions. Refer to the owner's manual for detailed maintenance schedules.
If the key fob stops working, first replace the battery. If it still doesn't work, try reprogramming the fob or consult the dealership for further assistance.
To check the transmission fluid: Ensure the vehicle is on a level surface and the engine is warm. With the engine running, remove the dipstick, wipe it clean, reinsert it, then remove it again to check the fluid level. Add fluid if necessary.