GMC Terrain 2010 Getting To Know Your Manual
![GMC Terrain 2010 manual cover](/images/CuFQmPxAOKwqnzQgJRgqIwFG/thumbs/thumb175x175.webp)
The recommended oil type for the 2010 GMC Terrain is SAE 5W-30 full synthetic oil.
To reset the TPMS on your 2010 GMC Terrain, turn the ignition to the ON position without starting the engine, press and hold the TPMS reset button until the TPMS indicator light blinks twice, and then release the button.
The towing capacity of the 2010 GMC Terrain is up to 3,500 pounds when properly equipped with the V6 engine and towing package.
To improve fuel efficiency, ensure your tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, and drive at steady speeds while avoiding rapid acceleration and heavy braking.
Common causes for the check engine light in a 2010 GMC Terrain include a loose gas cap, faulty oxygen sensor, or a malfunctioning catalytic converter. It's advisable to have the vehicle diagnosed with an OBD-II scanner.
To replace the cabin air filter, open the glove compartment, remove the dampener arm, squeeze the sides of the glove compartment to lower it fully, and remove the filter cover to access and replace the cabin air filter.
To check the transmission fluid, start the engine and let it reach operating temperature, then remove the dipstick, wipe it clean, reinsert it fully, and remove it again to check the fluid level. The fluid should be in the crosshatched area on the dipstick.
To replace a headlight bulb, open the hood, disconnect the electrical connector from the bulb, remove the retaining ring or screws, and extract the old bulb. Insert the new bulb, secure it with the retaining ring or screws, and reconnect the electrical connector.
Symptoms of a failing alternator include dimming headlights, electrical issues, a dead battery, and a battery warning light on the dashboard. If you experience these symptoms, have your alternator checked by a professional.
Signs of a faulty ignition coil include engine misfires, rough idling, a decrease in power and acceleration, and a check engine light. A diagnostic scanner can confirm the issue by checking for related error codes.