GMC Sierra Denali HD 2015 Getting To Know Your Manual
![GMC Sierra Denali HD 2015 manual cover](/images/nRfBULpAibKRWGLjRqkrkkxl/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn the ignition to the 'On' position without starting the engine. Use the DIC (Driver Information Center) controls to navigate to the 'Oil Life' display. Press and hold the checkmark button until the oil life percentage resets to 100%.
The recommended tire pressure for the 2015 GMC Sierra Denali HD is typically 35 PSI for both front and rear tires. However, always refer to the sticker on the driver's side door jamb for the most accurate information.
To pair your phone, turn on your vehicle's Bluetooth system and activate Bluetooth on your phone. Use the vehicle's infotainment system to search for Bluetooth devices, select your phone from the list, and follow the prompts to complete pairing.
For the 2015 GMC Sierra Denali HD, it is recommended to use SAE 5W-30 viscosity grade oil that meets GM dexos1 specifications. Always check the owner’s manual for the most accurate information for your specific engine.
It is recommended to inspect the air filter every 15,000 miles and replace it approximately every 30,000 miles, depending on driving conditions. If you drive in dusty conditions, more frequent changes may be necessary.
The towing capacity of the 2015 GMC Sierra Denali HD varies depending on the engine and configuration, but it can tow up to approximately 13,000 to 14,500 pounds. Always consult the owner's manual for specifics related to your vehicle's setup.
To replace the battery in the key fob, use a flathead screwdriver to gently pry open the fob. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up. Snap the fob back together once the new battery is in place.
To adjust the headlights, park your vehicle on a level surface facing a wall. Locate the adjustment screws on the headlight assembly. Use a screwdriver to adjust the beams to the desired height and alignment. Consult your owner's manual for detailed instructions.
If you’re experiencing transmission issues, first check the transmission fluid level and condition. If the fluid is low or appears dirty, have it changed or topped off. If problems persist, consult a professional mechanic to diagnose potential issues such as sensor malfunctions or mechanical failures.
To enable or disable traction control, locate the traction control button on the dashboard. Press the button to toggle the system on or off. A light on the instrument panel will illuminate to indicate the system's status.