GMC Sierra Denali 2015 Getting To Know Your Manual
![GMC Sierra Denali 2015 manual cover](/images/VFLMRQjYwXQkbQDITolRCkTD/thumbs/thumb175x175.webp)
The 2015 GMC Sierra Denali has a towing capacity of up to 9,400 pounds when properly equipped.
To reset the TPMS, turn the ignition to "On" without starting the engine, press and hold the TPMS reset button until the tire pressure light blinks three times, then drive the vehicle for about 20 minutes.
The 2015 GMC Sierra Denali typically requires SAE 5W-30 full synthetic oil. Always check the owner's manual for the manufacturer’s recommendations.
To pair your smartphone, go to the Bluetooth settings on your phone, search for "GMC IntelliLink" on the list of available devices, and select it. Confirm the passcode matches on both devices and accept the pairing request.
The air filter should typically be changed every 15,000 to 30,000 miles, depending on the driving conditions. Check the owner's manual for specific intervals.
The recommended tire pressure for the 2015 GMC Sierra Denali is usually 35 psi for both front and rear tires. However, refer to the placard on the driver's side door jamb for exact specifications.
To improve fuel efficiency, ensure your tires are properly inflated, keep up with regular maintenance, avoid excessive idling, and drive at steady speeds.
To replace the key fob battery, press the small button on the side to release the key. Use a flathead screwdriver to pry open the key fob, remove the old battery, and insert a new CR2032 battery. Snap the fob back together.
To check the transmission fluid level, warm up the engine, park on a level surface, and with the engine idling, pull out the transmission dipstick, wipe it clean, reinsert it fully, and then remove it again to check the level.
Common causes for the check engine light include a loose gas cap, faulty oxygen sensors, or issues with the catalytic converter. It's advisable to use an OBD-II scanner to read the error codes.