GMC Sierra 2500 HD 2023 Getting To Know Your Manual
![GMC Sierra 2500 HD 2023 manual cover](/images/YlFIVvTPkObvYjZcxqrUdRuU/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn on the ignition without starting the engine. Use the DIC controls on the steering wheel to navigate to the "Oil Life" display. Press and hold the checkmark button until the "Oil Life Reset" message appears. Confirm the reset by pressing the checkmark button again.
The recommended tire pressure for the GMC Sierra 2500 HD 2023 typically ranges around 60 psi for the front tires and 80 psi for the rear tires. However, always check the sticker on the driver's side door jamb for the exact specifications for your specific model and tire configuration.
To connect your smartphone via Bluetooth, ensure Bluetooth is enabled on your phone. On the Sierra's infotainment screen, go to the "Phone" menu and select "Pair Device." Follow the prompts and select your vehicle from the Bluetooth menu on your phone. Confirm the pairing code on both devices.
If your Sierra 2500 HD won’t start, check the battery connections for corrosion or looseness. Ensure the battery is charged and functioning. Check the fuel level and ensure the vehicle is in Park or Neutral. If the problem persists, consult a professional mechanic.
It is generally recommended to change the transmission fluid every 45,000 to 60,000 miles. However, consult your owner's manual for specific intervals based on your driving conditions.
The GMC Sierra 2500 HD 2023 typically requires SAE 0W-20 full synthetic oil. Always check your owner’s manual for the most accurate oil specifications for your specific engine type.
To adjust the headlights, park your vehicle about 25 feet from a wall. Turn on the headlights and locate the adjustment screws on the headlight assembly. Adjust the screws to align the beams at the correct height and angle. Consult the owner’s manual for detailed instructions and safety precautions.
The GMC Sierra 2500 HD 2023 has a maximum towing capacity of up to 18,500 pounds when properly equipped. This capacity can vary based on engine choice, cab style, and additional towing features. Consult your owner's manual for specifics on your model.
To replace the cabin air filter, locate the filter housing behind the glove box. Open the glove box and detach the dampening arm. Press inwards on the sides of the glove box to lower it completely. Remove the filter cover and replace the old filter with a new one, ensuring the airflow direction is correct. Reassemble the glove box.
If the check engine light comes on, ensure your gas cap is tightened as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to read the error code or take your vehicle to a qualified mechanic to diagnose and resolve the issue.