GMC Sierra 2019 Getting To Know Your Manual
![GMC Sierra 2019 manual cover](/images/XBAIyHXqmTvsqZPKooqxukpG/thumbs/thumb175x175.webp)
The recommended oil type for the GMC Sierra 2019 is SAE 0W-20 full synthetic motor oil.
To reset the oil life monitor, turn the ignition to the "On" position without starting the engine, press the accelerator pedal three times within five seconds, and then turn the ignition off.
If the check engine light comes on, check for loose gas cap, low oil levels, or other obvious issues. If the light persists, have the vehicle diagnosed by a professional to avoid potential damage.
To pair your smartphone, ensure Bluetooth is enabled on your phone, select 'Phone' on the IntelliLink screen, then 'Pair Device', and follow the on-screen instructions to complete the pairing process.
It is recommended to change the transmission fluid every 45,000 miles under severe conditions and every 90,000 miles under normal driving conditions.
The towing capacity of the GMC Sierra 2019 varies depending on the configuration but can be up to 12,200 pounds when properly equipped.
To replace the cabin air filter, open the glove box, remove the damper string and stops, access the filter door behind the glove box, and replace the old filter with a new one.
Follow the maintenance schedule in the owner’s manual, which includes regular oil changes, tire rotations every 7,500 miles, and brake inspections every 15,000 miles.
To enable cruise control, press the 'Cruise Control' button on the steering wheel, accelerate to the desired speed, and then press the 'Set' button.
If the battery is dead, jump start the vehicle using jumper cables and another car, or replace the battery if it is old and unable to hold a charge.