GMC Savana 2022 Owner's Manual
![GMC Savana 2022 manual cover](/images/zRXYgkNHyRbMPgGMNSHRwBPC/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Fully press and release the accelerator pedal three times within five seconds. The oil life monitor should reset, and you will see a confirmation message on the dashboard.
The recommended tire pressure for the 2022 GMC Savana is usually listed on a sticker inside the driver's side door jamb. Typically, it is around 35 PSI, but you should verify with the specific sticker for your vehicle configuration.
To pair your phone, turn on your vehicle's Bluetooth system and ensure your phone's Bluetooth is also enabled. On the infotainment screen, select "Phone" then "Pair Device." Follow the on-screen prompts and confirm the passkey on your phone to complete the pairing process.
If the engine overheats, pull over safely and turn off the engine. Allow it to cool before checking the coolant level. If the coolant is low, add a 50/50 mix of coolant and water. Avoid opening the radiator cap while the engine is hot to prevent burns. If the issue persists, contact a professional mechanic.
To replace the air filter, open the hood and locate the air filter housing. Unclip or unscrew the housing cover, remove the old filter, and insert the new one ensuring it fits snugly. Replace the cover and secure it back in place.
The recommended engine oil for the 2022 GMC Savana is typically 5W-30 synthetic oil. However, check your owner's manual for the exact specifications for your engine variant.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery and the other end to a grounded metal surface on the engine block of the dead vehicle. Start the booster vehicle, then the Savana.
A squealing noise when braking could indicate worn brake pads. Inspect the brake pads and replace them if necessary. Persistent noise may require professional inspection to check for other possible issues such as rotor damage or debris.
To check the transmission fluid level, ensure the vehicle is on a level surface and the engine is warm. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert and remove it again to check the fluid level, which should be between the "Full" and "Add" marks.
Follow the maintenance schedule in the owner's manual, which typically includes regular oil changes every 7,500 miles, tire rotations every 7,500 miles, and inspections of brakes, belts, and hoses every 15,000 miles. Adjust the schedule based on driving conditions and usage.