GMC Arcadia 2020 Getting To Know Your Manual
![GMC Arcadia 2020 manual cover](/images/KZVBgSrMRSRJSOkrTkYeqsKu/thumbs/thumb175x175.webp)
To reset the oil life monitor on your 2020 GMC Acadia, turn the ignition to the "on" position without starting the engine. Use the controls on the steering wheel to navigate to the "Oil Life" menu on the driver information center. Press and hold the "SET/CLR" button until the display shows 100%.
The 2020 GMC Acadia is recommended to use SAE 5W-30 engine oil. Ensure the oil meets the dexos1 specification for optimal performance.
To pair your smartphone, enable Bluetooth on your phone and select 'Phone' on the Acadia's infotainment system. Choose 'Pair Device,' and select your vehicle on your phone's Bluetooth menu. Confirm the pairing code matches on both devices, then approve the connection.
The 2020 GMC Acadia has a maximum towing capacity of up to 4,000 pounds when properly equipped with the V6 engine and the available towing package.
To change a flat tire, first ensure the vehicle is on a level surface. Locate the spare tire and jack in the rear cargo area. Consult the owner's manual for jack placement. Loosen lug nuts, lift the vehicle with the jack, remove lug nuts and the flat tire, replace with the spare, and tighten the lug nuts in a star pattern. Lower the vehicle and fully tighten the lug nuts.
The maintenance schedule for the 2020 GMC Acadia includes regular checks at intervals such as 7,500 miles for tire rotation and oil changes, 15,000 miles for engine air filter replacement, and 45,000 miles for the transmission fluid check. Refer to the owner's manual for a detailed schedule.
If the infotainment system is unresponsive, try turning off the vehicle and opening the driver's door to reset. If the problem persists, check for software updates or perform a factory reset through the settings menu. Consult the owner's manual for specific instructions.
The fuse box in the 2020 GMC Acadia is located under the dashboard on the passenger side and another one in the engine compartment near the battery. Refer to the owner's manual for the exact location and fuse diagram.
To replace the cabin air filter, open the glove box and remove the dampers and stops to access the filter cover. Remove the old filter and insert the new one, ensuring it is positioned correctly. Replace the cover and reattach the glove box.
If the check engine light illuminates, ensure the fuel cap is tight and check for any obvious issues. If the light remains on, consider using an OBD-II scanner to identify the error code or take the vehicle to a certified technician for diagnosis and repair.