GMC Arcadia 2014 Getting To Know Your Manual

To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the turn signal lever until the "Vehicle Information Menu" is displayed. Use the arrow buttons to scroll to "Oil Life" and press the "Set/Clr" button to reset it.
The recommended tire pressure for the 2014 GMC Acadia is generally 35 PSI for both the front and rear tires. Always refer to the sticker inside the driver's door for the most accurate information.
First, check the fuse related to the rear camera. If the fuse is intact, inspect the camera for any visible damage or obstructions. If the problem persists, it might be a wiring issue or a malfunctioning camera, and a professional diagnosis may be required.
The 2014 GMC Acadia typically requires 5W-30 synthetic motor oil. Check your owner's manual for specific recommendations based on your driving conditions.
To pair your phone, turn on the vehicle and enable Bluetooth on your phone. Use the "Config" button on the console to navigate to the Bluetooth settings and select "Pair Device." Follow the prompts on your phone and the vehicle's display to complete the pairing process.
If the check engine light illuminates, first ensure that the gas cap is tight as a loose cap can trigger the light. If the light persists, use an OBD-II scanner to read the trouble codes or visit a professional mechanic for diagnosis.
It is generally recommended to change the transmission fluid every 45,000 miles. However, refer to your owner's manual for the manufacturer's recommendations based on your specific driving conditions.
A squealing noise upon starting could indicate a worn or loose serpentine belt. Inspect the belt for wear and ensure it is properly tensioned. If the noise persists, the belt tensioner or pulleys may need inspection or replacement.
To replace a headlight bulb, first disconnect the negative battery cable. Remove the headlight assembly by loosening the retaining clips or screws. Twist the bulb socket counterclockwise to remove it, replace the bulb, and reassemble the components in reverse order.
Common causes include under-inflated tires, dirty air filters, or worn spark plugs. Ensuring regular maintenance and addressing these issues can help improve fuel efficiency.