GE UCC15 UCC15NJII Installation Instructions

To clean the GE UCC15NJII Ice Maker, turn off the ice maker and remove all ice. Use a mixture of warm water and mild detergent to clean the interior surfaces. Rinse thoroughly and dry with a soft cloth.
Ensure the ice maker is plugged in and the power is on. Check the water supply line for any blockages or leaks. Verify that the water filter is not clogged and replace it if necessary.
It is recommended to replace the water filter every six months to ensure optimal performance and ice quality.
The GE UCC15NJII Ice Maker has a maximum ice production capacity of approximately 65 pounds of ice per day.
The GE UCC15NJII Ice Maker does not have an option to adjust ice cube size. It is designed to produce uniform cubes.
Some noise is normal during ice production. However, if you hear unusual sounds, check for obstructions in the ice bin or ensure the ice maker is level.
To reset the ice maker, unplug it from the power source for 5 minutes, then plug it back in. This can resolve minor glitches.
Regularly clean the ice maker, replace the water filter every six months, and check for any leaks or obstructions in the water line.
Ensure that the temperature settings are correct and that the ice maker is not overloaded. Providing adequate ventilation can also help improve efficiency.
The ice maker is equipped with an automatic defrost system. However, if manual defrosting is needed, turn off the unit and allow the ice to melt naturally.