GE PK7800 PK7800SKSS Installation Instructions
![GE PK7800 PK7800SKSS Oven manual cover](/images/uouhSoISPJHbsRmpBeTDbZLl/thumbs/thumb175x175.webp)
To perform a self-clean cycle, remove all racks and any items from the oven. Close the door and select the 'Self Clean' option. Choose the desired cleaning time (usually 3, 4, or 5 hours) and press 'Start'. The door will lock automatically, and the cleaning process will begin. Ensure the kitchen is well-ventilated during this process.
If the oven is not heating, check if it is properly plugged in and that the circuit breaker is not tripped. Ensure the oven settings are correct and that the door is fully closed. If the issue persists, it might be due to a faulty heating element or thermostat, requiring a service call from a GE technician.
To adjust the oven temperature calibration, press the 'Bake' pad and enter a temperature of 550°F. Then press and hold the 'Bake' pad until '00' appears. Use the number pads to increase or decrease the temperature in 1-degree increments, then press 'Start' to save the changes.
To clean the oven racks, remove them from the oven and soak them in warm, soapy water. Use a non-abrasive scrubber to remove any stubborn grime. Rinse and dry thoroughly before placing them back into the oven. Avoid leaving the racks in during a self-clean cycle, as this can cause discoloration.
To replace the oven light, ensure the oven is off and cool. Remove the light cover by turning it counterclockwise, then take out the old bulb. Replace it with a new 40-watt appliance bulb and screw the cover back on. Confirm that the bulb is securely in place before using the oven.
The convection feature uses a fan to circulate hot air evenly around the food, which can result in faster cooking times and more even browning. It is ideal for baking or roasting, as it helps to maintain a consistent temperature throughout the oven.
To set the delay start, press the 'Bake' button and enter the desired temperature. Press 'Cook Time' and enter the cooking duration. Then, press 'Delay Start' and enter the time you want the oven to start. Press 'Start' to activate the delay start function.
If the control panel is not responding, check if the oven is properly connected to a power source and that there are no tripped breakers. Try resetting the oven by turning off the circuit breaker for 30 seconds and then turning it back on. If the problem persists, contact GE customer service for further assistance.
Yes, aluminum foil can be used in the oven. However, do not line the oven bottom with foil, as it can interfere with heat circulation and damage the oven. Instead, use foil to cover dishes or wrap food, ensuring it does not touch the oven walls or heating elements.
To lock the oven controls, press and hold the 'Lock Controls' button for three seconds until 'Loc' appears on the display. This will prevent any accidental changes to the settings. To unlock, press and hold the same button again for three seconds until the display clears.