GE PGS930 PGS930BPTS Installation Instructions
![GE PGS930 PGS930BPTS Range manual cover](/images/VKtDAripcNnTSdNEkfYEKZgc/thumbs/thumb175x175.webp)
To calibrate the oven temperature, press the "Bake" button and set the temperature to 350°F. Hold the 'Bake' button for several seconds until the display shows '00'. Adjust the temperature using the number pad, then press 'Start' to save the changes.
Check if the range is plugged in and the circuit breaker is not tripped. Ensure the control settings are correct. If the issue persists, inspect the bake element or call for professional service.
Yes, the GE PGS930 PGS930BPTS Range has a self-cleaning feature. Remove the oven racks and any large food debris, then select the self-clean cycle and follow the prompts on the display.
If the control panel is locked, press and hold the "Lock Controls" button for 3 seconds until the lock icon disappears.
Use cookware with a magnetic bottom, such as cast iron or stainless steel. Avoid using glass, copper, or aluminum pans unless they have a magnetic base.
Use a soft cloth and a stainless steel cleaner or a mixture of vinegar and water. Wipe in the direction of the grain to avoid scratches.
Check for obstructions around the door seal. Ensure the hinges are not bent or damaged. If the problem continues, consult the user manual or contact service support.
To use convection bake, press the 'Convection Bake' button, set the desired temperature, and press 'Start'. The fan will circulate the hot air for even cooking.
Ensure the cooktop is correctly connected to power. Check if the control knobs are properly set and the elements are clean and intact. If needed, reset the cooktop by turning off the circuit breaker for a few minutes.
Replace the oven light bulb when it burns out. Use a bulb that matches the specifications in the user manual, typically a 40-watt appliance bulb. Ensure the oven is off and cool before replacing.