GE JGS760 JGS760DPWW Installation Instructions
![GE JGS760 JGS760DPWW Range manual cover](/images/GStazuIPBlFYtNFBjLaFROQs/thumbs/thumb175x175.webp)
To perform a self-clean cycle, remove all oven racks and accessories. Close the oven door completely. Press the "Self Clean" button, select the desired cleaning time (2, 3, or 4 hours), and press "Start." The oven door will lock automatically, and the cleaning cycle will begin.
Ensure that the oven is properly connected to a power source. Check the circuit breaker to see if it has tripped. If the oven is receiving power but still not heating, the heating element or temperature sensor may need to be replaced. Consult the user manual or contact customer support for assistance.
To convert the range from natural gas to propane, you need a conversion kit, which includes orifices and instructions. Turn off the gas supply, remove the current orifices, and replace them with those from the kit. Adjust the pressure regulator as instructed. It's recommended to have a qualified technician perform the conversion.
Check for obstructions around the door or hinges that might prevent it from closing. Inspect the door seal for damage or debris. If the problem persists, the door hinges or latch might need adjustment or replacement.
Ensure the oven is cool and turn off the power supply. Remove the glass cover by turning it counterclockwise. Unscrew the old bulb and replace it with a new appliance bulb of the same type. Replace the glass cover and restore power.
First, try resetting the range by turning off the power at the circuit breaker for 5 minutes. If the panel still doesn't respond, it may be a faulty control board or touchpad. Contact a service technician for diagnosis and repair.
Remove the grates and caps from the cooktop. Wash them in warm, soapy water or place them in the dishwasher. For stubborn stains, use a non-abrasive cleaner and scrub gently. Rinse and dry them thoroughly before reassembling.
An uneven or yellow flame can indicate a dirty burner orifice or an improper gas-to-air ratio. Clean the burner ports with a needle to remove any blockages. If the issue persists, adjust the air shutter or consult a professional technician.
Press the "Clock" button on the control panel. Use the "+" and "-" buttons to set the correct time. Press "Start" or "Clock" again to save the setting.
Always ensure proper ventilation when using the gas range. Keep flammable materials away from the burners. Use cookware that matches the size of the burner. Do not leave the range unattended while in use, and keep children away from the appliance.