GE GTW720 GTW720BPNDG Installation Instructions
![GE GTW720 GTW720BPNDG Washing Machine manual cover](/images/vfZaRHzfySSNwvmciGXkdrcP/thumbs/thumb175x175.webp)
Load clothes evenly around the agitator, distributing them loosely to allow free movement. Avoid overloading to ensure optimal washing performance.
Check if the power cord is plugged in, the door is closed properly, and the water supply is turned on. Also, ensure that the cycle selection is correct and the start button has been pressed.
Remove the dispenser by lifting it out of the drawer. Rinse it under warm water to remove any residue or buildup, and then dry it before reinserting.
Ensure the appliance is level, and check if the load is balanced. Redistribute clothes to even out the weight and try adjusting the leveling feet.
Regularly clean the drum, detergent dispenser, and door seal. Check hoses for leaks or wear, and ensure the machine is leveled properly.
Unplug the washing machine for a few minutes, then plug it back in. This can reset the control board and clear minor errors.
Yes, it is recommended to use HE detergent for efficient cleaning and to prevent excess suds that can damage the machine.
Check the drain hose for clogs or kinks, ensure the pump filter is clean, and verify that the drain pump is functioning properly.
Locate the filter access panel at the bottom of the machine. Open the panel, remove the filter, clean it under running water, and then reinstall it securely.
Use the "Delicate" or "Hand Wash" cycle to gently clean delicate fabrics, minimizing wear and tear. Avoid high spin speeds.