GE GFE28GELDS Installation Instructions
![GE GFE28GELDS Refrigerator manual cover](/images/bLPzkqeRXYKcyJztJnFtgcsp/thumbs/thumb175x175.webp)
To adjust the temperature settings, press the "Settings" button on the control panel. Use the arrows to navigate to the temperature settings and adjust the refrigerator and freezer temperatures as desired.
First, ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings. If the problem persists, clean the condenser coils and ensure that the airflow vents inside the refrigerator are not blocked.
The water filter should be replaced every six months or when the indicator light turns on, whichever comes first.
Water leaking inside the refrigerator could be due to a clogged defrost drain. To fix this, locate the drain at the back of the refrigerator and clear any blockages with a solution of warm water and vinegar.
To change the light bulb, first unplug the refrigerator. Remove the light cover by unscrewing it or snapping it off, depending on the model. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
If the ice maker stops working, check if it is turned on and ensure the water supply line is connected and not kinked. Verify that the freezer temperature is set correctly and not too warm.
To improve energy efficiency, keep the refrigerator at least two-thirds full, set the temperature to the recommended settings, and ensure the door seals are tight without any gaps.
Regular maintenance steps include cleaning the condenser coils every six months, checking and replacing the water filter, and inspecting the door seals for any damage or gaps.
To reset the control panel, unplug the refrigerator or turn off the circuit breaker for 30 seconds, then restore power. This can help resolve minor control panel issues.
Loud noises can be due to the refrigerator being unlevel, causing vibrations. Check the leveling of the appliance and adjust the feet as necessary. Additionally, ensure nothing is obstructing the fan or compressor.