Fender 57 Bandmaster 8170501000 110V 60Hz TW Manual

Fender 57 Bandmaster 8170501000 110V 60Hz TW Amplifier manual cover

Pages 4

Year 0

Language(s)

of 4

Fender 57 Bandmaster 8170501000 110V 60Hz TW Amplifier Specification

The Fender '57 Bandmaster 8170501000 is a high-quality tube amplifier that delivers a vintage sound reminiscent of the classic Fender amps from the 1950s. Designed for 110V 60Hz electrical systems, this amplifier is tailored for use in North American power grids. The amplifier boasts a hand-wired circuitry that ensures a pure signal path and exceptional tonal clarity. It features three 10-inch Jensen P10R speakers, known for their warm, rich sound and dynamic range, which contribute to the amplifier's authentic vintage voice.

The '57 Bandmaster is powered by a set of 12AX7, 12AY7, 6L6, and 5AR4 tubes, producing approximately 26 watts of power. This configuration delivers a balanced, clean tone at lower volumes and a smooth overdrive when pushed, ideal for blues and rock genres. The amplifier's control panel includes basic yet effective controls: Volume, Treble, Bass, and Presence, allowing for intuitive sound shaping.

Its solid pine cabinet construction enhances resonance and durability, while the lacquered tweed covering gives it a classic and visually appealing finish. The amplifier also features a leather handle for easy transport, reflecting Fender's attention to detail in both functionality and aesthetics.

With its combination of vintage design, high-quality components, and hand-wired construction, the Fender '57 Bandmaster 8170501000 provides musicians with an authentic and reliable solution for achieving classic tones. Perfect for both studio recording and live performances, this amplifier embodies the timeless sound and craftsmanship that Fender is renowned for.

Fender 57 Bandmaster 8170501000 110V 60Hz TW Amplifier F.A.Q.

How do I connect my Fender 57 Bandmaster to an external speaker cabinet?

To connect your Fender 57 Bandmaster to an external speaker cabinet, use a high-quality speaker cable to connect the amplifier's speaker output jack to the input jack of the speaker cabinet. Ensure the impedance matches between the amp and the cabinet to avoid damage.

What is the correct way to bias the tubes on the Fender 57 Bandmaster?

Biasing the tubes on the Fender 57 Bandmaster should be done by a qualified technician. It involves adjusting the bias voltage to ensure the tubes operate correctly and prolong their lifespan. This requires opening the amp and using specialized equipment.

What maintenance is necessary to keep my Fender 57 Bandmaster in top condition?

Regular maintenance includes checking and replacing tubes as needed, cleaning the input jacks and controls, ensuring the amp is kept in a dry and dust-free environment, and periodically inspecting the wiring and solder joints for any signs of wear.

How can I troubleshoot a humming noise coming from my Fender 57 Bandmaster?

To troubleshoot a humming noise, first check all cables and connections for any loose or faulty plugs. Ensure the amp is on a grounded outlet. If the hum persists, it might be due to a faulty tube or a grounding issue within the amp itself.

What should I do if my Fender 57 Bandmaster suddenly stops producing sound?

If your amp stops producing sound, check that all cables are securely plugged in and the power is on. Inspect the tubes to see if they are glowing; if not, they might need replacement. If the issue persists, there might be an internal fault that requires professional repair.

Can I use effects pedals with my Fender 57 Bandmaster?

Yes, you can use effects pedals with the Fender 57 Bandmaster. Connect your guitar to the input of the pedal chain and the output of the last pedal to the amp's input. Be sure to adjust the levels to avoid overdriving the amp's input.

What is the recommended way to clean the exterior of my Fender 57 Bandmaster?

To clean the exterior, use a soft, dry cloth to wipe down the amp. For more stubborn dirt, a slightly damp cloth can be used, but ensure no moisture gets into any openings. Avoid using any harsh chemicals or abrasive materials.

How can I achieve the best tonal quality from my Fender 57 Bandmaster?

For optimal tonal quality, experiment with different tube brands and speaker combinations. Adjust the amp's tone controls to suit your playing style, and consider using quality cables and pickups. Proper room acoustics can also enhance the sound.

Is it normal for the Fender 57 Bandmaster to get hot during use?

Yes, it is normal for tube amplifiers like the Fender 57 Bandmaster to generate heat during operation. Ensure the amp has proper ventilation and avoid placing it in confined spaces to prevent overheating.

What steps should I take if my Fender 57 Bandmaster's tubes are microphonic?

If the tubes become microphonic, first identify the problematic tube by gently tapping each one with a pencil and listening for noise. Replace the faulty tube with a new, high-quality one. If the issue persists, consider consulting a professional technician.