Elddis Encore Motor 2015 Owner Handbook
![Elddis Encore Motor Caravan 2015 manual cover](/images/yeZzMbCMpIpTaOXduDkitIRt/thumbs/thumb175x175.webp)
To winterize your Elddis Encore 2015, drain all water systems, including the fresh water tank, wastewater tank, and water heater. Add antifreeze to the pipes, and ensure all faucets are open. Disconnect the battery and store it in a warm place if possible.
First, check the battery terminals for corrosion and clean them if necessary. Test the battery with a multimeter. If it is not holding a charge, consider replacing it. Ensure all electrical systems are turned off when the caravan is not in use to prevent battery drain.
To improve fuel efficiency, ensure your tires are properly inflated, remove unnecessary weight, maintain a steady speed on highways, and keep up with regular engine maintenance, such as oil changes and air filter replacements.
Inspect the roof seals and joints for any visible cracks or damage. Use a sealant specifically designed for motor caravans to repair any leaks. Regularly inspect and maintain roof seals to prevent future leaks.
To operate the heating system, ensure the gas supply is connected and turn on the heater using the control panel. Adjust the temperature setting to your preference. Make sure the vents are open for optimal airflow.
Follow the manufacturer's maintenance schedule, which typically includes annual service checks, regular inspections of the water and electrical systems, and routine checks of the tires, brakes, and engine components.
Check the water pump switch and ensure it is turned on. Inspect the fuse box for any blown fuses related to the water pump. If the pump is still not working, test the pump for power and replace it if necessary.
Ensure the fridge is level, as it may not function correctly otherwise. Check the power supply and make sure it is set to the correct mode (gas, electric, or battery). Clean the vents and coils to improve airflow and efficiency.
Locate the fuse box, usually found near the control panel or under the driver's seat. Identify the blown fuse by checking for a broken filament. Replace it with a new fuse of the same amperage rating to ensure safety and functionality.
Check for any obstructions or debris in the awning mechanism. Inspect the tension arms and ensure they are not damaged. If the motorized awning is not working, check the power supply and consult the manual for manual retraction instructions.