Dyson DC26 Operating Manual

Pages 16

Year 2012

Language(s)

of 16

Dyson DC26 Specification

The Dyson DC26 is a compact canister vacuum cleaner designed for efficiency and convenience in cleaning small spaces. Its lightweight construction, weighing approximately 5.3 kilograms, makes it easy to maneuver and transport. The DC26 is powered by Dyson's Root Cyclone technology, which ensures consistent suction without loss of power, effectively capturing microscopic dust particles and allergens.

The vacuum is equipped with a motorized brush bar that efficiently removes dirt and pet hair from carpets and rugs, while also being gentle enough for hard floors. It features a clear bin made from tough polycarbonate, allowing users to easily see when it needs emptying. The bin is hygienically emptied with the press of a button, reducing contact with dust and debris.

The DC26 includes a combination tool and stair tool, providing versatility for various cleaning tasks. Its hose and wand are designed to extend to a considerable length, allowing for cleaning of hard-to-reach areas. Additionally, the vacuum uses a HEPA filter, which captures allergens and expels cleaner air, making it suitable for allergy sufferers.

With a low noise level and compact design, the Dyson DC26 is ideal for apartment living and smaller homes. Its energy-efficient motor ensures optimal performance while minimizing electricity consumption. The vacuum's design incorporates Dyson’s engineering focus on durability and ease of use, making it a reliable choice for everyday cleaning needs. The DC26's compact form factor also allows for easy storage, fitting comfortably into small closets and storage spaces.

Dyson DC26 F.A.Q.

How do I empty the bin on my Dyson DC26?

To empty the bin, first ensure the vacuum is unplugged. Press the red release button located on the cyclonic unit to detach it from the main body. Hold the bin over a trash can and press the red button again to release the dirt.

What should I do if my Dyson DC26 loses suction?

Check for blockages in the hose, wand, and brush bar. Ensure the filters are clean and properly installed. Also, make sure the bin is empty and the cyclone is free from debris.

How often should I clean the filters on my Dyson DC26?

The filters should be cleaned every 3 months. Rinse under cold water until the water runs clear, allow to dry completely for at least 24 hours before reinserting.

Why is my Dyson DC26 making a whistling noise?

A whistling noise often indicates a blockage or a problem with the seal. Check all connections and look for blockages in the hose or attachments.

How do I clean the brush bar on my Dyson DC26?

To clean the brush bar, turn the machine off and unplug it. Use a coin to unlock the end cap and remove the brush bar. Clear any hair or debris and replace it securely.

What steps should I take if the Dyson DC26 won't start?

Ensure the machine is plugged in and the power outlet is working. Check for any blown fuses and inspect the power cord for damage.

How do I maintain the cyclone unit of my Dyson DC26?

Detach the cyclone unit and clear any debris. Use a brush to gently clean the inside. Do not immerse in water or use detergents.

Why does my Dyson DC26 have a burning smell?

A burning smell may indicate an obstruction or a motor issue. Unplug the vacuum and check for blockages. If the smell persists, contact Dyson support.

Can I use the Dyson DC26 on hardwood floors?

Yes, the Dyson DC26 is suitable for hardwood floors. Use the appropriate attachment to prevent scratches and ensure efficient cleaning.

How do I store my Dyson DC26 to ensure longevity?

Store the vacuum in a cool, dry place. Ensure the bin is empty and the filters are clean before storage. Avoid wrapping the cord tightly around the machine.